This Report presents first results of static tests on Helical Compression Springs which respond to loads with torsional stress. Initially we have to perform an experimental Analysis with a Suspension system of an Automobile. Using the dimensions of the spring a virtual model was created in Pro/E Wildfire 3.0.Then the virtual model was simulated in Ansys Multiphysics by importing the model as IGES file. In that Stress Analysis were carried out with various loads. The Analysis were done in static mode. Then the results were tabulated. After studying the results from the Analysis an optimized model was created by varying various parameters from the model previously developed like diameters, material properties etc., then similar work has to be done with the new optimized model i.e. Stress Analysis. And the results were obtained. Finally the results were compared and necessary steps were taken to control various parameters. The results of this investigation can add an important contribution to the experience of static behavior in a very high cycle regime. © 2015 Elsevier B.V., All rights reserved.