Article

UNSPECIFIED (2024) Preface. Journal of Physics: Conference Series, 2801 (1). 011001. ISSN 1742-6588

Anandan, R. and Sivaraman, G. and Rajasankar, M. and Girimurugan, R. (2023) CFD Analysis of Heat Transfer Coefficient and Pressure Drop in a Shell and Tube Heat Exchanger for Various Baffle Angles. Scopus. pp. 49-60. ISSN 2195-4356

Ashokkumar, S and Thiyagarajan, C and Anvar, Misbah and Karthikayan, Kiran and Midhun, M (2020) Design and fabrication of automatic scrap collecting vehicle. IOP Conference Series: Materials Science and Engineering, 993 (1). 012038. ISSN 1757-8981

Ashokkumar, S. and Elanthiraiyan, A and Shagu, S. and Srinivasan, M. and Deepan, K. B. (2020) Comparison and Analysis of Custard Apple Seed Oil with Engine Lubricant (Bio Lubricant). IOP Conference Series: Materials Science and Engineering, 993 (1). 012008. ISSN 1757-8981

Ashokkumar, S. and Natarajan, S. and Prabhahar, M. and Sivabalan, M. and Ravichandran, G. (2025) A Comparative Analysis of Heat Transfer in Elliptical and Straight Slot Cross-Sectional Spiral Pipes at Varying Fluid Velocities Using CFD Methodology Toward Efficiency. Springer, 79. pp. 363-372. ISSN 2662-3161

Ashokkumar, S. and Natarajan, S. and Prabhahar, M. and null, null and null, null (2025) A Comparative Analysis of Heat Transfer in Elliptical and Straight Slot Cross-Sectional Spiral Pipes at Varying Fluid Velocities Using CFD Methodology Toward Efficiency. Springer Proceedings in Materials, 79. 363 - 372. ISSN 26623161; 2662317X

Ashokkumar, S. and Prabhahar, M. and Arvind, S. and Dhanasekar, S. (2025) Finite Element Analysis of Hybrid Helical Gear Models with Carbon Fiber-Reinforced Polymer Composite for Weight Reduction. Springer, 79. pp. 167-178. ISSN 2662-3161

Ashokkumar, S. and Prabhahar, M. and null, null and Dhanasekar, S. (2025) Finite Element Analysis of Hybrid Helical Gear Models with Carbon Fiber-Reinforced Polymer Composite for Weight Reduction. Springer Proceedings in Materials, 79. 167 - 178. ISSN 26623161; 2662317X

Ashokkumar, S. (57211607936) and Shankar, P. R. (7102168508) and Sathiyaraj, S. (57004723200) and Mathew, Jestin Paul (57207037391) and Mohammed Vasir, P. V. (57207047004) and Muzamil Mahamood, P. K. (57207034790) (2018) Evaluation of mechanical properties of friction welded EN24 steel joints.

Bubesh Kumar, D. (55355172600) and Muthurajan, Kumarasamy Govindan (6507651177) (2016) Fatigue corrosion of 316LSS different chromium content.

Bubesh Kumar, D. (55355172600) and Muthurajan, Kumarasamy Govindan (6507651177) and Chowdary, Amit (57004809100) (2015) Comparison of titanium, 316 Lstainless Steel, magnesium cementless hip implants mechanical characteristics in vitro using finite element analysis.

Bubesh Kumar, D. (55355172600) and Muthurajan, Kumarasamy Govindan (6507651177) and Nagalakshmi (2016) Fatigue corrosion of 304 SS with different chromium content.

Casmir, G. Antony (57004907100) and Kumar, Sunil Ashok (59050294400) and Rayan, A. Sengole (57220381072) (2015) Optimization of wirecut EDM using HCHCr by Taguchi analysis.

Chetiyar, R. Jai Ganesh (57004900900) and Hemanathan and Prasath, M. Guru (57004767600) and Selva Babu, B. (57221608100) (2015) Design and improvement of combustion chamber for small gas turbine power plant.

Devadoss, Vimalakeerthy (57348626500) and Kanagaraj, N. (23985006900) and Sanavullah, M. Y. (18134643600) (2013) Analysis of flux barrier location with permanent magnets in improving the performance of permanent magnet synchronous reluctance motor using finite element method.

Edlabadkar, A. P. and Mudadla, Balaji and Karthick, K. and Kumar, M. Senthil and Adams, A. and Selvaraju, Mayakannan (2025) Optimization of Machining Parameters and Performance Analysis of AA2024/ZrO2 Metal Matrix Composite Using TOPSIS: Insights into Squeeze Casting and Tribological Behavior. Journal of Environmental Nanotechnology, 14 (1). 181 - 192. ISSN 22790748; 23195541

G. Saravanan et al.,, G. Saravanan et al., (2019) Performance Studies on the Reversing Valve Incorporated Air-to-Water Heat Pump with Heat Storage Device. International Journal of Mechanical and Production Engineering Research and Development, 9 (3). pp. 109-118. ISSN 2249-6890

Imthiyas, A and Kalyana kumar, S and Sai krishnan, P P (2020) Heat transfer analysis of thermal barrier in high temperature fluid vessel. IOP Conference Series: Materials Science and Engineering, 993 (1). 012033. ISSN 1757-8981

Imthiyas, A. and MUSTHAFA, B. and Ashish, K. and Gobind, M. (2025) Prediction Model by Adaptive Neuro-Fuzzy Inference System of R600A Vapour Compression Refrigeration System Using Al2O3/TiO2 Composite Nanolubricants. Russian Journal of Physical Chemistry B, 19 (4). 953 - 960. ISSN 19907931; 19907923

Imthiyas, A. and Saravanan, M. and Sanjaykumar, B M and Sujith Raj, P and Udhaya Kumar, M (2021) Influence of Nozzle Hole Geometry of CI Engines Performance and Emission Parameters Fuelled by Diesel and Biodiesel-A Review. Journal of Physics: Conference Series, 2040 (1). 012046. ISSN 1742-6588

Jayaraman, R. (7003762994) and Balusamy, Thangavel (25625915300) and Ravi, S. (57210722820) (2017) Effect of single pass on wear behaviour on friction stir processed Az91d magnesium alloy for environmentally clean process.

Jayaraman, R. (7003762994) and Balusamy, Thangavel (25625915300) and Ravi, S. (57210722820) (2015) Study of tensile and corrosion behaviour from the microstructure of AZ91D magnesium alloy.

Joseph, Jennifer G. (36643948100) and Padma Ragam, S. (57194087178) and Rajitha, R. (57194091249) (2016) A critical study of disaster as reflected in literature.

Kaliappan, A. S. and Mohanamurugan, S. and Nagarajan, P. K. (2020) Numerical Investigation of Sinusoidal and Trapezoidal Piston Profiles for an IC Engine. Journal of Applied Fluid Mechanics, 13 (1). pp. 287-298. ISSN 17353572

Kalyanakumar, S. and Natarajan, S. and Muthusamy, Prabhahar and Saravanakumar, M. (2024) Influence of Pre-Aging Treatment and Process Parameters Effects of Mechanical Properties in AA 6061- T6 By Ranking Algorithm and ANOVA Methods. International Journal of Vehicle Structures and Systems, 16 (3). ISSN 0975-3060

Kalyanakumar, S. (57208525497) and Mohanmurugan, S. (57208524330) and Prakash, S. (56673505200) and Sethukmar, Sachin (57208533602) and Imthiyaz, Rasheed Mohammad (57208528223) and Yousaf, Risaldheen (57208533124) (2018) Experimental investigation of material removal rate, surface roughness of 304 stainless steel using cnc wire EDM.

Kannaiyan, Sathishkumar and Boobalan, Chitra and Nagarajan, Fedal Castro and Sivaraman, Srinivas (2019) Modeling of thermal conductivity and density of alumina/silica in water hybrid nanocolloid by the application of Artificial Neural Networks. Chinese Journal of Chemical Engineering, 27 (3). pp. 726-736. ISSN 10049541

Krishna Sastry, K. V. (37039708200) and Seshagiri Rao, Vaddi Seshagiri (56350128100) (2015) Enhancement of the quality features of drilling of C-C composite by the optimization of process parameters.

Krishna Sastry, K. V. (37039708200) and Seshagiri Rao, Vaddi Seshagiri (56350128100) and Palanikumar, K. (12787828800) and Dhanalakshmi, R. (57212728586) and Kuravi, Abhishek (56105857300) (2014) Assessment of process parameters influencing delamination factor on the drilling of CFRC composite material with TiN coated carbide tool.

Kumaran, P and Natarajan, S (2020) Effect of thermal barrier coating by nano particle on IC engine for various bio fuels - Review. IOP Conference Series: Materials Science and Engineering, 993 (1). 012014. ISSN 1757-8981

Kumaran, P. and Praveen, R. and Sajeev, Dhanush P and Ashwanth, C K and Jithu, G. S. (2020) RETRACTED: Performance analysis of ceramic hybrid lubricant. IOP Conference Series: Materials Science and Engineering, 993 (1). 012012. ISSN 1757-8981

Kumaran, P. (57052725900) and Venkatraman, M. (16065122100) (2015) Study and analysis compound die manufacturing using WC-EDM process.

Kumaresan, G. (57213524843) and Muthurajan, Kumarasamy Govindan (6507651177) (2015) Process analysis of wind mill yaw bearing using composite material with ANSYS.

Lakshmi Narayanan, N. (57004842200) and Prabhu, P. (57213123327) (2015) Evacuation of slag deposits on boiler tubes and improving its heat transfer.

Lakshminarayanan, N and Senthil, J and Alvin raja, A and Jesudawson Silvanus, N and Satish (2020) Design and static analysis of polymer composite wind turbine blade. IOP Conference Series: Materials Science and Engineering, 993 (1). 012027. ISSN 1757-8981

Lakshminarayanan, N. (57004732800) and Surendra Babu, K. (36678357100) and Balamurugan, N. (57213727501) (2015) Design modification and testing of CI engine muffler.

Loganathan, S. (56962706300) and Leenus Jesu Martin, M. (55322353500) and Prabhu, L. (55803582200) (2016) Performance simulation of diesel engine fuelled with diesel-diglyme blend by using universal load andoxygenate correction factors in wiebe heat release function.

M, Prabhahar and S, Prakash and S, Nallusamy and S, Ponnarasu and Reddy, Yeddula Deekeshwar (2024) Optimization of Operating Factors and Blending Levels of Diesel, Algae Methyl Ester, Graphene Oxide and Producer Gases - Calorific Values Using Response Surface Methodology in HCCI Engine. International Journal of Mechanical Engineering, 11 (1). pp. 1-15. ISSN 23488360

Muhammed, Fayiz P K (57191835768) and Muhammed, Shafeeq K K (57191839769) and Loganathan, S. (56962706300) and Prabhu, L. (55803582200) and Abdulla, Rasick C. (57191843608) (2016) Heavy vehicle chassis redesign in Ansys-13 with composite material.

Murali Manohar, R. (55191308100) and Prabhahar, M. (55175598900) and Sendilvelan, S. (57207790071) and Kumar Choudhary, Vikash (55945544100) (2012) Thermal and emission properties of engine fueled with diesel and bio-diesel blends of B20N, B80N, B20K and B80K.

Nagarajan, Fedal Castro and Kannaiyan, Sathish Kumar and Boobalan, Chitra (2022) A Proficient approach to enhance heat transfer using cupric oxide/silica hybrid nanoliquids. Journal of Thermal Analysis and Calorimetry, 147 (10). pp. 5589-5598. ISSN 1388-6150

Nagarajan, Fedal Castro and Kannaiyan, SathishKumar and Boobalan, Chitra (2020) Intensification of heat transfer rate using alumina-silica nanocoolant. International Journal of Heat and Mass Transfer, 149. p. 119127. ISSN 00179310

Narasiman, Venkatraman (56600697000) and Jeyakumar, Suppandipillai (36819956300) and Mani, Muthu (56600022600) (2013) Optimizing the compression ratio of C.I engine fuelled in sardine oil ethyl ester.

Narasiman, Venkatraman (56600697000) and Jeyakumar, Suppandipillai (36819956300) and Mani, Muthu (56600022600) and Sivalakshmi, Sivanathan (42062348800) (2012) Performance and emission characteristics on methyl esters of sardine oil fuelled in diesel engine.

Natarajan, Rajan and Kanagaraj, Shanmugapriyan and Palaniappan, Thangavel and Dhanaskodi, Deepa (2025) Machinability studies on metal additive manufactured 316L stainless steel using electrochemical machine. Journal of Electrochemical Science and Engineering, 15 (2). ISSN 18479286

Prabhahar, M. and Rajan, K. (2013) Performance and combustion characteristics of a diesel engine with titanium oxide coated piston using Pongamia methyl ester. Journal of Mechanical Science and Technology, 27 (5). pp. 1519-1526. ISSN 1738-494X

Prabhahar, M. (55175598900) and Krishnamoorthi, Sangeetha (57189645228) and Xavier, J. Francis (57216186181) and Sendilvelan, S. (57207790071) (2018) Experimental investigations on dual bio-fuel (Pine biodiesel and palm biodiesel) blended with diesel on a single cylinder diesel engine.

Prabhahar, M. (55175598900) and Sendilvelan, S. (57207790071) and Sassykova, Larissa R. (56178673800) (2018) Studies on pongamia oil methyl ester fueled direct injection diesel engine to reduce harmful emissions.

Prabhu, L. and Baskaran, T. and Krishnamoorthi, Sangeetha and Saravanan, M. (2024) Dissimilar Metal Welds and Weld Joint Analysis for Duplex with Super Duplex Stainless Steel Plate Joint by Semi-automatic TIG Welding. Springer, 58. pp. 387-397. ISSN 2662-3161

Prabhuraj, Parasuraman (55383291700) and Rajakumar, Selvarajan (56574463000) and Balasubràmanian, Visvalingam (35580170700) (2015) Experimental investigation on mechanical and metallurgical properties of the friction stir welded AA7075-T651 Aluminium alloy joint.

Prakash, S. and Prabhahar, Dr. M. and Eanest. B, Obeth (2019) Computational Fluid Dynamics Simulation of A VCR Research Engine Working With Cold Flow Analysis. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2137-2140. ISSN 22498958

Prakash, S. and Prabhahar, M. and Niyas, O.P. and Faris, Safavanul and Vyshnav, C. (2020) Thermal barrier coating on IC engine piston to improve efficiency using dual fuel. Materials Today: Proceedings, 33. pp. 919-924. ISSN 22147853

Prakash, S. and Suresh, P. and Sasikumar, R. and Suresha, B. (2024) Superior Mechanical Properties of Aluminium Matrix Composites Fabricated through Modified Matrix Encapsulated Feeding Method. Transactions of the Indian Institute of Metals, 77 (3). pp. 707-716. ISSN 0972-2815

Prakash, S. (56673505200) and Loganathan, D. (57194092861) and Surendra Babu, K. (36678357100) and Dilli Babu, G. (57217490079) and Gopala Krishan, V. (57194091086) and Gopi, G. (59592564000) (2016) Mechanical behaviour of silk fabric reinforced eco friendly polymer matrix composite.

Prakash, S. (56673505200) and Prabhahar, M. (55175598900) and Venkatraman, M. (16065122100) and Lakshminarayana, Vemuri (57195739087) and Saravanakumar, M. (58118037100) (2018) CFD analysis of electrically heated catalytic converter to reduce cold start emission in gasoline engine.

Prakash, S. (56673505200) and Prabhakar, S. (56043513400) and Saravanakumar, M. (58118037100) (2015) Experimental study of using vegetable oil as renewable fuel in diesel engine.

Prakash, S. (56673505200) and Prabhakar, S. (56043513400) and Saravanakumar, M. (58118037100) and Annamalai, Kandaswamy A. (57211974962) (2015) Design optimization of a heat exchanger header with inlet modifier.

R, Praveen. and Prabhu, L. and Khatri, Pranjal and Mistry, Niranjan Kumar and Mondal, Sahid (2019) Design and Analysis of Gearless Drive System. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2105-2107. ISSN 22498958

Raj, Kiran (57205496651) and Prabhakar, S. (56043513400) and Rajesh Kumar, J. (56223942300) (2014) Experimental investigation and analysation for the performance and emission test using citronella oil in twin cylinder diesel engine.

Rajendran, Chinnasamy and Chinta, Sandeep and Rajakumar, G. and Srinivasan, V. P. and Balachandar, K. and Arunkumar, S. (2025) Correlation between the Materials' Flow Behavior and the Strength of Friction Stir Welded AA2014 Aluminum Alloy Joints. Springer. 166 - 180. ISSN 2662-3161

Rajesh Kumar, J. (56223942300) and Prabhakar, S. (56043513400) and Kiran Raj, K. (56299254800) (2014) Performance and emission characteristics of citronella oil in single cylinder diesel kirloskar engine.

Sangeetha, Sreekumar Prabha and Sona, S. and null, null and null, null (2025) Performance Enhancement of Concrete Reinforced with Hybrid Nano-Materials: Insights into Mechanical Strength, Durability Behaviour and Microstructural Characteristics. Iranian Journal of Science and Technology - Transactions of Civil Engineering. ISSN 22286160

Saravanan, G. (58578900600) and Muthurajan, Kumarasamy Govindan (6507651177) and Govindarajan, Murali (58490435200) and Arunkumar, Munimathan Kumar (57200577398) (2018) A study of reversing valve performance in split type air conditioner.

Sathiyaraj, S. (57004723200) and Elanthiraiyan, A. (57004964100) and Haripriya, G. (59488039900) and Pari, V. Srikanth (57004879900) (2015) Optimization of machining parameters for EN8 steel through Taguchi method.

Sathiyaraj, S. (57004723200) and Prabhuraj, Parasuraman (55383291700) and Sai, Suraj Mondal (57004549700) and Jeebanpatra and Shashankkumar (2015) Investigation of machining characteristics of tungsten carbide by wire cut EDM process.

Sellamuthu, P. (57215565318) and Manoharan, C. (6603154521) (2015) Theoretical analysis of a cooling tower for condensation of fresh water from plume.

Senthil, J. (57004889200) and Dhanasekaran, V. (57211067558) (2015) Experimental investigation of lubrication system of milling operation on aluminum alloy 6060.

Senthil, J. (57004889200) and Haripriya, G. (59488170800) (2016) Time analysis with most technique.

Senthil, J. (57004889200) and Kalyana, Kumar S. (57191847129) and Saravanan, M. (57356264100) and Pagalavan, M. (57191850678) (2016) Fabrication and mechanical characterization of plain and metal mesh glass fibre reinforced hybrid composites.

Senthil, J. (57004889200) and Ramesh, S. (57210456690) (2016) Static and dynamic analysis of composite propeller.

Senthil, J. (57004889200) and Rayan, J. Vijay Amirtha (57004824000) (2015) Strengthening analysis of bonded, riveted and hybrid joint in glass Fibre epoxy composites by Ansys.

Senthil, J. (57004889200) and Sounthararasu, V. (57004937900) (2015) Study of tensile, compressive and impact properties with and without fibre orientation for epoxy glass fibre and carbon fibre composites.

Senthilkumar, A. and Abhishek, P.V. and Adithyan, M. and Arjun, A. (2021) Experimental investigation of CuO/Sio2 hybrid nano-lubricant in R600a vapour compression refrigeration system. Materials Today: Proceedings, 45. pp. 6083-6086. ISSN 22147853

Senthilkumar, A. and Mohammed Sahaluddeen, P.A. and Nufais Noushad, Mohammed and Mohammed Musthafa, E.K. (2021) Experimental investigation of ZnO / Sio2 hybrid nano-lubricant in R600a vapour compression refrigeration system. Materials Today: Proceedings, 45. pp. 6087-6093. ISSN 22147853

Senthilkumar, A. and Prabhu, L. and Sathish, T. and Saravanan, R. and Casmir Jeyaseelan, G.Antony and Ağbulut, Ümit and Mahmoud, Z. and Shaik, Saboor and Ahamed Saleel, C (2023) Enhancement of R600a vapour compression refrigeration system with MWCNT/TiO2 hybrid nano lubricants for net zero emissions building. Sustainable Energy Technologies and Assessments, 56. p. 103055. ISSN 22131388

Senthilkumar, Alagarsamy (35171501600) and Praveen, R. (57093655500) and Kumaran, P. (57052725900) and Rajasekaran, Mahesh (57194088076) (2016) Optimization of fan speed in VAV air conditioning using ANN.

Shanmugam, Anusuya and Muralidharan, Nisha and Michael Gromiha, M (2024) Targeting SARS-CoV-2 Spike and Main protease with phytochemicals from Herbs and spices: Molecular Docking and dynamics simulation studies. Journal of Physics: Conference Series, 2801 (1). 012013. ISSN 1742-6588

Shettahalli Mantaiah, Vinu Kumar (57004875300) and Lakshminarayanan, N. (57004732800) and Dubey, Chandra Prakash (57004625000) (2015) A comprehensive study on impact and dynamic mechanical properties of silicon carbide (SiC) filled glass fabric reinforced polyester (G-P) nanocomposites.

Sivamaran, Venkatesan (57202763841) and Rajamani, G. P. (59454661900) and Balasubràmanian, Visvalingam (35580170700) and Padmanaban, G. (35759281800) (2014) Fatigue behaviour of friction stir welded AZ61A magnesium alloy joints.

Soudagar, Manzoore Elahi Mohammed and Bashir, Muhammad Nasir and Vijayan, Dhanasingh Sivalinga and Hossain, Ismail and Kannan, Sathish and Al-Obaid, Sami M. and Lee, Joonsang (2025) Study of antimicrobial and mechanical behaviors on kapok fiber reinforced bran particulates blended epoxy matrix composite. Thermal Science and Engineering Progress, 57. ISSN 24519049

Surendrababu, K. and Michael, B. Samuvel and Prabhahar, M. and Sukesan, Abhijith and Suresh, Adarsh and Suresh, Nidhin (2024) Fabrication of Screw Pump for Hydraulic Applications. Springer, 58. pp. 359-368. ISSN 2662-3161

Suresha, Bheemappa L. (13405699200) and Shettahalli Mantaiah, Vinu Kumar (57004875300) and Hemanth, Rajashekaraiah (57195916533) (2017) Friction and wear performance of cenosphere filled carbon-epoxy composites under dry and water lubricated conditions: A comparative study.

Thiagarajan, C. and Krishnamoorthi, Sangeetha and Adithyan, P. and Ajmal, P. A. and Adwaith, M. P. (2025) Optimization and Tribological Behaviour of Stir Cast Aluminium MMC’s by Taguchi Method. Springer, 79. pp. 33-47. ISSN 2662-3161

Thiagarajan, C. and Prabhahar, M. and Prakash, S. and Senthil, J. and Kumar, M. Saravana (2020) Heat transfer analysis and optimization of engine cylinder liner using different materials. Materials Today: Proceedings, 33. pp. 778-783. ISSN 22147853

Velumayil, Ramesh and Seikh, Asiful and Balasubramanian, Vedagiri and Kalam, Md. and Ravishankar, Sathyamurthy and Venugopal, Jayaprakash and Chitra, Lakshmikanthan and Saravanakumar, Lakshmanasamy and Senthilkumar, T.S. (2023) Performance enhancement of water output via latent heat storage system with single slope solar stills. Thermal Science, 27 (6 Part). pp. 4851-4860. ISSN 0354-9836

Venkatesan, S. and Rajamani, G. P. and Balasubramanian, V. and Rajakumar, S. (2015) Effect of Tool Rotational Speed on Tensile and Microstructural Behaviour of Friction Stir Welded AZ31B Magnesium Alloy Joints. Journal of Advanced Microscopy Research, 10 (4). pp. 277-283. ISSN 21567573

Venkatraman, M. (16065122100) and Abid, M. (57004405000) and Rasid, Mohammed (57196863369) and Shahul (2015) Experimental and structural simulation of vibration absorption system of a suspension spring.

Venkatraman, M. (16065122100) and Devaradjane, Gopalakrishnan D. (6507481568) and Sudesh Kumar, M. P. (56805215700) and Prabhu, L. (55803582200) (2014) Optimization of operating parameters on the performance and emission of a Ci engine operated with diesel-pungamia biodiesel blend.

Venkatraman, M. (16065122100) and Ramlala, Gupta (57089152000) and Ravi, Prakash (57088089500) (2015) Experimental investigation on performance and emission characteristics of diesel-JME blends fueled di diesel engine at optimum engine operating parameters.

Venketesh, R. and Sasikala, K. (2024) The design of an intrusion detection system in MANET using the IGWO-ANN classification algorithm. International Journal of Networking and Virtual Organisations, 31 (1). pp. 22-42. ISSN 1470-9503

Vijayan, D.S. and Senthilkumar, A. (2024) Advanced vapour compression refrigeration system dispersed with hybrid Nanolubricants: ANN-Based approach. Thermal Science and Engineering Progress, 53. p. 102779. ISSN 24519049

Viswanathan, K K and Navaneethakrishnan, P V and Aziz, Z A (2015) Buckling Analysis of Rectangular Plates with Variable Thickness Resting on Elastic Foundation. IOP Conference Series: Earth and Environmental Science, 23. 012006. ISSN 1755-1315

Book Section

Chitra, B. and Sathishkumar, K. and Castro, N. Fedal and Srinivas, S. (2019) Thermophysical Properties Enhancement Using Hybrid Nanofluids and Their Synthesis and Applications. In: Nanofluids and Their Engineering Applications. CRC Press, pp. 21-46. ISBN 9780429468223

Loganathan, S. (2011) Performance simulation of CIDI engine fuelled with alternate oxygenated fuel (DME) and oxygenated (Diglyme) diesel blend by generic approach with universal oxygenate correction factor. In: Innovations in Fuel Economy and Sustainable Road Transport. Elsevier, pp. 161-174.

Conference or Workshop Item

Bommi, R. M. and Ayyadurai, M. and Vijayakumari, P. and Salman, N. and Kanithkar and Babu, Roshith (2022) Sewage pipe inspection robot for block detection and clearance. In: UNSPECIFIED.

Imthiyas, A. and Sathiyaraj, S. and Mandal, Ranjan Kumar and Veeramani, Vignesh (2025) Wear characteristic optimization of Al7075 metal matrix composites applying Taguchi method. In: Wear characteristic optimization of Al7075 metal matrix composites applying Taguchi method.

Kalyanakumar, S. and Sengodan, Natarajan and Jeyaseelan, Antony Casmir and Sundaran, Abijith and Nair, Karthik Raveendran (2025) Optimizing face milling parameters for high-speed machining of AA6061 aluminum alloy: A central composite design approach for enhanced performance. In: Optimizing face milling parameters for high-speed machining of AA6061 aluminum alloy: A central composite design approach for enhanced performance.

Kumaran, P. and Senthilkumar, A. and Robinson, Roshan and Reddy, Naveen Kumar and Lokesh S. (2023) Design and fabrication of hybrid screw pump for fluidics. In: UNSPECIFIED.

Murali Manohar, R. and Sendil Velan, S. and Prabhahar, M. and Casmir Jayaseelan, G. Antony (2011) UNSPECIFIED In: 2011 International Conference on Green Technology and Environmental Conservation (GTEC 2011), Chennai.

Prakash, S. and Lakshminarayanan, N. and Ashif C., Muhammed and Nadirsha N. S., Mohammed and Naidu, Ravada Manoj (2023) Meshing of IC engine and meromorphic quadratic differential application using automatic mesh generation. In: UNSPECIFIED.

Praveen, R. and Imthiyas, A. and Jassim, K. S. and Menon, Abijith K. and Kumar, T. Vishnu Anil (2023) Dynamic analysis of impeller vane in centrifugal pump for maximum efficiency using Flotran. In: UNSPECIFIED.

Saravanan, M. and Jayaseelan, Antony Casmir and Sourab V. and Sourav P. V. and Rakesh Babu R. (2023) Experimental investigation of hybrid composite material for AQUA silencers. In: UNSPECIFIED.

Saravanan, M. and Praveen R. and Kumar, Akhil A. and Prabha, Amal and Jacob, Akhil Job (2023) Performance enhancement of heat exchanger using aluminium nano fluids. In: UNSPECIFIED.

Sastry, K. V. Krishna and Rao, V. Seshagiri (2014) Application of design of experiments in the optimization of CFRC drilling process. In: 2014 IEEE National Conference On Emerging Trends In New & Renewable Energy Sources And Energy Management (NCET NRES EM), Chennai, India.

Sathiyaraj, S. and Prabhu, L. and Kumar, Padam and Subash, S. and Ali, P. T. Ihjas and Abhay, M. (2023) Enhancement of heat transfer in tubular heat exchanger. In: UNSPECIFIED.

Sellamuthu, P. and Gibu, Jithin P. and Suresh Kumar, V. P. and Reddy, S. Madhava and Sivaraman, Gopal and Ramakrishnan, A. and Girimurugan, R. (2025) Experimental investigations and optimization of process parameter through high speed hard turning process on C45 steel. In: Experimental investigations and optimization of process parameter through high speed hard turning process on C45 steel.

Senthilkumar, A. and Anderson, A. and Arunkumar, G. and Prakash S., Surya and Raj K., Nishanth (2023) Improving the R600a vapour compression refrigeration system’s energy efficiency employing graphene oxide nanoparticles to retrofit R134a refrigerator using fuzzy logic prediction. In: UNSPECIFIED.

Senthilkumar, A. and Lakshminarayanan N. and Anand, Kotian Ashvith and Ansari, Mohamed Fakkir and Giridharan, K. (2023) Effect of Zirconium dioxide nanolubricants on coefficient of performance of R600a vapour compression refrigeration system - A fuzzy logic approach. In: UNSPECIFIED.

Senthilkumar, A. and Senthil, J. and Pranav C. C. and Ramakrishnan, Pranav and Bose, Rahul (2023) Experimental investigation of graphene nanolubricant with various concentration in R600a refrigeration system and comparison with normal refrigerator - Prediction by fuzzy logic. In: UNSPECIFIED.

Srinivasan, V. P. and Saravanan, B. A. and Shanthi, C. and Sasidharan, R. and Arunkumar, S. and Induprakash, S. (2024) An Examination of the Friction and Wear Characteristics of Carburized, Boronized, and Austenitic 1080 and 1566 Steel. In: UNSPECIFIED.

Sundarrajan, Ashokkumar and Sathiyaraj, S. and Prabhahar, M. and Teji, Jenson and Salam, Muhammed Razi Bin (2025) Investigating the mechanical characteristics of hybrid laminates utilizing glass fiber, almond shell and epoxy resin. In: Investigating the mechanical characteristics of hybrid laminates utilizing glass fiber, almond shell and epoxy resin.

Thiagarajan, C. and Natarajan, Elangovan and Prabhahar, M. and Jayapalan, Senthil and Kuppuswami, Surendrababu (2025) Investigation on the efficiency of ZrN and CuN multi-layer coatings in advanced machining processes. In: Investigation on the efficiency of ZrN and CuN multi-layer coatings in advanced machining processes.