A hybrid energy system is a system that consists of two or more alternative energy sources (ex: solar and wind). In a modern industrial application that energy source can be utilized for the control application for real-time power system stabilization. The entire monitoring and control progress of the industrial utilities is an appropriate improvement in the industrial growth system. Here, the various industrial parameters are taken up for control such as gas, fire, machine, motor, in embedded based control. Solar, wind-based renewable power plant energy is stored in Battery. The Diesel generator is a backup sources Hybrid controller to implement the energy sources changeover logic based on optimal energy management strategy. The controller establishes an Automatic mode of operation in the hybrid controller for machine and motor power changeover operations. In this module, the fire and gas sensor will analyze its set range variation by the controller. If it exceeds it pre-defined values set in the controller the immediate indication and alert is arrived for to take necessary safety precaution and control in real time application. In industrial progress, the machine and motor are valuable sources for operating different load condition. Some mix-constrain load machine will be a failure. This effect will be rectified in this scheme through load analysis. The power control circuit provides a constant source depends upon load changes. All these variations will be monitored and control by IOT. © 2019 Elsevier B.V., All rights reserved.