Article

Arunkumar, S and Kumaravel, P and Velmurugan, C and Senthilkumar, V (2019) Effects of thermal aging on phase transformation and microstructural characteristics of NiTi shape memory alloy. Materials Research Express, 6 (10). p. 105708. ISSN 2053-1591

Arunkumar, S. and Kumaravel, P. and Velmurugan, C. and Senthilkumar, V. (2018) Microstructures and mechanical properties of nanocrystalline NiTi intermetallics formed by mechanosynthesis. International Journal of Minerals, Metallurgy, and Materials, 25 (1). pp. 80-87. ISSN 1674-4799

Ashokkumar, S. and Elanthiraiyan, A. and Ashique, K. K. Marwan Bin and Ahamed, Kannan and Rijin, K. (2024) Experimental Investigation on the Mechanical Properties of Al6061/B4C Composite Materials. Springer, 58. pp. 369-376. ISSN 2662-3161

Ashokkumar, S. and Sathiyaraj, S. and Kumar, Nirmal and Muzammil, Shaik and Kumar, Dabbara Ravi (2020) Feasibility Study on Aluminium 7075 Metal Matrix Composite Using Graphene Oxide. IOP Conference Series: Materials Science and Engineering, 993 (1). 012009. ISSN 1757-8981

Bubesh Kumar, D. and Selva babu, B and Aravind Jerrin, K M and Joseph, N and Jiss, Abdul (2020) Review of Spark Plasma Sintering Process. IOP Conference Series: Materials Science and Engineering, 993 (1). 012004. ISSN 1757-8981

Dhanalakshmi, B. and Suresh, G. and G.a, Suganya Josephine and Padmadevi, B. (2025) Enhanced pseudocapacitive performance of wet-chemically synthesized novel CuO/BaO nanocomposite. Ionics. ISSN 09477047; 18620760

Harinarayanan, G. and Krishnan, V.K. and Natarajan, M.P. and Surender, V. and Gowthaman, J. (2022) Wear Behavior and Wear Worn Surface Analysis on Hardox Steel. Key Engineering Materials, 935. pp. 99-104. ISSN 1662-9795

Imthiyas, A. and Sathiyaraj, S. and Silambarasan, R. and Ramkumar, V. (2025) Preparation and Mechanical Characterization of TiC Particles Reinforced Al6061 Alloy Composites. Springer, 79. pp. 337-344. ISSN 2662-3161

Imthiyas, A. and Sathiyaraj, S. and Silambarasan, Ragunathan and Ramkumar, V. (2025) Preparation and Mechanical Characterization of TiC Particles Reinforced Al6061 Alloy Composites. Springer Proceedings in Materials, 79. 337 - 344. ISSN 26623161; 2662317X

Lakshmanan, C. and Viswanath, R. N. and Panda, Padmalochan and Sundaravel, B. and Rajaraman, R. and Amarendra, G. (2020) Vacancy defects and their influence on mechanical properties in as-dealloyed and Fe + ion irradiated nanoporous Au. EPL (Europhysics Letters), 128 (3). p. 36002. ISSN 1286-4854

Manivannan, A. and Sasikumar, R. and Nithyanandam, T. and Ganesan, C. (2024) Quantitative and Qualitative Analysis of Advanced Aluminum Composites for Heat Transfer Properties. Transactions of the Indian Institute of Metals, 77 (11). pp. 3413-3423. ISSN 0972-2815

Prakash, S. and Abdul Favas, C. S. and Ameeth Basha, I. and Venkatesh, R. and Prabhahar, M. and Durairaj, V. P. and Gomathi, K. and Lenin, Haiter and Adam, Khan M. (2022) Investigation of Mechanical and Tribological Characteristics of Medical Grade Ti6al4v Titanium Alloy in Addition with Corrosion Study for Wire EDM Process. Advances in Materials Science and Engineering, 2022. pp. 1-10. ISSN 1687-8434

R, Vasanth and K, Mohan and Rengarajan, Sathish and Jayaprakash, R and Kumar, R Ashok (2019) Characterization and corrosion effects of Friction surfaced IS-2062 E250 CU with AA6063. Materials Research Express, 6 (12). p. 126579. ISSN 2053-1591

Ramesh, R. and Elangovan, N. and Lewise, K. Anton Savio and Anandan, R. and Sathish, S. and Shathragna, M. Dheeraj and Marichamy, S. and Subbiah, Ram (2022) Effect of fly ash on metal matrix composites – An overview. Materials Today: Proceedings, 50. pp. 1315-1318. ISSN 22147853

Sathiyaraj, S. and Sendrayan, Venkatesan and Kumaran, P. and Prabhakaran, Balaji and Sourav Sreejith, K. M. (2025) Examining the Mechanical Properties of Al-SiC Metal Matrix Composites Produced Using the Stir Casting Method. Turkish Journal of Engineering, 9 (1). 21 - 27. ISSN 25871366

Sathiyaraj, S. and Senthilkumar, A. and Muhammed Ameen, P. and Sundar, Rhitwik and Saseendran, Vishnu (2021) Experimental investigations on mechanical properties of Al-B4C metal matrix composites. Materials Today: Proceedings, 45. pp. 6372-6376. ISSN 22147853

Selva Babu, B. and Bubesh Kumar, D. and Prabhu, L. and Sudhir Kumar Yadav, K. (2025) Microstructural Behaviour of Spark Plasma Sintered Carbon Nanotube + Ti6Al4V Nanocomposites. Springer, 79. pp. 435-442. ISSN 2662-3161

Senthil, J. and Kumar, Manisaravana and Thiagarajan, C. and Prabhahar, M. (2024) Synthesis and Evaluation of Zircon and Al2O3 Zircon-Reinforced AA6061 Alloy Composites in Age-Hardened Condition. Springer, 58. pp. 337-350. ISSN 2662-3161

Senthilkumar, A. and Selva Babu, B. and Madhan Raj, L. and Tharun, R. (2025) Preparation and Microstructure Behaviour of CNT/Ceramic Materials by Using Spark Plasma Sintering. Springer, 79. pp. 443-449. ISSN 2662-3161

Thiagarajan, C and Lakshminarayanan, N and Anand, Abhay and Nikhil Santhosh, M. and Anderson, Naveen J (2020) Investigation and Analysis of Properties of Magnesium Alloy for Suitability to Electric Vehicle Components. IOP Conference Series: Materials Science and Engineering, 993 (1). 012007. ISSN 1757-8981

Thiagarajan, C. and Krishnamoorthi, Sangeetha and null, null and null, null and Adwaith, Mohan (2025) Optimization and Tribological Behaviour of Stir Cast Aluminium MMCs by Taguchi Method. Springer Proceedings in Materials, 79. 33 - 47. ISSN 26623161; 2662317X

Varthanan, P. Ashoka and Rajesh, A. and Sandeep, Ch. and Shanthi, C. and Josh, F. T. and Arunkumar, S. and Jayaraman, P. and Kumar, G. Naveen (2024) Optimization of the shot peening process parameters to improve the flexural strength of heated 2024 aluminium alloy. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (7). pp. 4729-4735. ISSN 1955-2513

Venkataramanan, A.R. and Subramaniyan, Madheswaran and Kumar, S. Lakshamana and Jawahar, R. Raj and Prabhu, L. (2021) Application of CCD in RSM to obtain optimize treatment of tribological characteristics of WC-10Co-4Cr nanoceramic thermal spray coating. Materials Today: Proceedings, 45. pp. 6160-6170. ISSN 22147853

Venkatesh, R. and Upadhyay, Viyat Varun and Chinna Ram, G. and Mohanavel, Vinayagam and Vijayan, Dhanasingh Sivalinga and Sharma, Abhishek and Soudagar, Manzoore Elahi Mohammed and Fouly, Ahmed and Seikh, Asiful Hossain (2025) Hexachloroethane fluxing mechanism and actions of hybrid fillers on functional behaviour of AZ31B alloy composites. Journal of Mechanical Science and Technology, 39 (7). 3987 - 3992. ISSN 1738494X; 19763824

Vijayakumar, K and Prabhu, L and Subin, B S and Satheen, Sabari and Vaishnav, K (2020) Development of Hybrid Aluminium Metal Matrix Composites for Marine Applications. IOP Conference Series: Materials Science and Engineering, 993 (1). 012016. ISSN 1757-8981

Viswanath, R. N. and Lakshmanan, C. and Sampath Kumar, T. S. (2024) Doping effects on mechanical properties of nanoporous gold systems. Journal of Porous Materials, 31 (4). pp. 1247-1255. ISSN 1380-2224

Conference or Workshop Item

Surendiran, M. and Parthiban, A. (2019) Corrosion protection performance of ceria-copolymer bilayer coating on 304 stainless steel in 0.1 M H2SO4 medium. In: 7TH NATIONAL CONFERENCE ON HIERARCHICALLY STRUCTURED MATERIALS (NCHSM-2019), 22–23 February 2019, Chennai, India.