Article

Balakrishnan, T. and Revathi, P. and Krishnaveni, A. and Thirupathy, J. and Ramamurthi, K. (2018) Structural, dielectric, thermal and antibacterial properties of a ferroelectric single crystal: bis-glycine cobalt sulphate pentahydrate. Journal of Materials Science: Materials in Electronics, 29 (19). pp. 16971-16982. ISSN 0957-4522

Bhuvaneswari, P. V. and Ramamurthi, K. and Babu, R. Ramesh (2018) Effect of substrate temperature on the structural, morphological and optical properties of copper bismuth sulfide thin films deposited by electron beam evaporation method. Journal of Materials Science: Materials in Electronics, 29 (20). pp. 17201-17208. ISSN 0957-4522

Dhanaraj, K. and Suresh Kumar, C. and Socrates, S. H. and Vinoth Arulraj, J. and Suresh, G. (2021) A comparative analysis of microwave assisted natural (Murex virgineus shell) and chemical nanohydroxyapatite: structural, morphological and biological studies. Journal of the Australian Ceramic Society, 57 (1). pp. 173-183. ISSN 2510-1560

Dhilipkumar, Thulasidhas and Arumugam, Soundhar and Rajesh, Murugan and Venkatesan, Raja and Sasikumar, R. and Al-Asbahi, Bandar Ali (2024) Evaluating the flexural and vibrational response of carbon nanotube strengthened co-cured sandwich composites. Carbon Letters, 34 (5). pp. 1443-1452. ISSN 1976-4251

Dhilipkumar, Thulasidhas and Arunpandian, Muthuraj and Arumugam, Soundhar and Sadeq, Abdellatif Mohammad and Karuppusamy, P. and Oh, Taehwan and Ahmed Awadh Bahajjaj, Aboud Ahmed Awadh and Shankar, Karthik V. and K, Selvakumar (2025) Exploring the synergistic effects of graphene on the mechanical and vibrational response of kenaf/pineapple fiber-reinforced hybrid composites. Polymer Composites, 46 (5). 4591 - 4604. ISSN 02728397; 15480569

Dhilipkumar, Thulasidhas and Sadeq, Abdellatif Mohammad and Shankar, Karthik V. and Murali, Arun Prasad and Karuppusamy, P. and K, Selvakumar and Giri, Jayant P. and Sabeur, Hassen (2025) Performance evaluation of dual-scale strengthened co-bonded single-lap joints using carbon nanotubes and Z-pins with ANN. Nanotechnology Reviews, 14 (1). ISSN 21919097; 21919089

Dhilipkumar, Thulasidhas and Venkatesan, Raja and Kim, Seong-Cheol and P, Karuppusamy and Murali, Arun Prasad and Shankar, Karthik V. and Almutairi, Tahani Mazyad (2024) Assessing the structural and free vibrational performance of areca/ ramie fibre composite reinforced with graphene nanofiller. Industrial Crops and Products, 222. p. 119599. ISSN 09266690

Gokulraj, S. and Saravanan, K. G. and Vijayakumar, K. and Arunkumar, K. (2025) Thermo-mechanical and mechanical performance of interlaced glass fiber epoxy hybrid composites reinforced with almond biochar biofiller. Journal of Polymer Research, 32 (5). ISSN 10229760; 15728935

Gopi Krishnan, R and Suganthan, R and Prabhakaran, V (2020) Preparation of Graphene based Hydroxyapatite by Freeze Drying Method. IOP Conference Series: Materials Science and Engineering, 993 (1). 012163. ISSN 1757-8981

L, Karthick and Muthusamy, Prabhu and Manju, J. and Bhat, Suriya Shaffi and Nagarajan, L. and Prasanna Venkatesh, R. (2025) Development of eco-friendly FRP rebar building material with chopped pineapple fiber and Si3N4 bioceramic vinyl ester. Biomass Conversion and Biorefinery, 15 (10). 15795 - 15807. ISSN 21906823; 21906815

Raja, S. and Babu, R. Ramesh and Ramamurthi, K. (2018) Magnetic and photocatalytic properties of bismuth doped KNbO 3 microrods. Materials Research Bulletin, 105. pp. 349-359. ISSN 00255408

Raja, S. and Ramesh Babu, R. and Ramamurthi, K. and Sethuraman, K. (2018) Influence of Cr-doping on structural, morphological, optical, dielectric and magnetic properties of KNbO 3 ceramics. Materials Chemistry and Physics, 213. pp. 130-139. ISSN 02540584

Sampath, M. and Sankarasubramanian, K. and Archana, J. and Hayakawa, Y. and Ramamurthi, K. and Sethuraman, K. (2018) Structural, optical and photocatalytic properties of spray deposited Cu2ZnSnS4 thin films with various S/(Cu+Zn+Sn) ratio. Materials Science in Semiconductor Processing, 87. pp. 54-64. ISSN 13698001

Senthilkumar, Alagarsamy and Selva Babu, B. and Madhan Raj, L. and Tharun, R. (2025) Preparation and Microstructure Behaviour of CNT/Ceramic Materials by Using Spark Plasma Sintering. Springer Proceedings in Materials, 79. 443 - 449. ISSN 26623161; 2662317X

Shinyjoy, E. and Karthika, A. (2025) Advanced bioimplants nanomaterials for load-bearing applications: Case studies. Springer. pp. 383-416. ISSN 2662-3161

Surendrababu, K. and Sathiyaraj, S and Issac Premson, M. and GuruMugilan, D. and Sridhran, E. (2021) Fabrication and Tribological Studies of Hybrid Composite Material. Journal of Physics: Conference Series, 2040 (1). 012049. ISSN 1742-6588

Suriya Prakash, M and Dhilipkumar, T and Sadeq, A.M and Shankar, K.V and Karuppusamy, P and Karim, M.R and Murali, A.P and K, K and Dinesh Kumar, N (2025) Synergistic enhancement of mechanical and water resistance properties in snake grass/luffa cylindrica fiber composites integrated with silicon carbide additive. Polymer Composites, 46 (15). pp. 13881-13892. ISSN 02728397; 15480569

Conference or Workshop Item

Kalpana, M. and Nagalakshmi, R. (2022) Synthesis and characterization of hydroxyapatite from chicken eggshells – A novel bioceramics. In: UNSPECIFIED.

Krishnasastry, K V and Dhanalakshmi, S and Seshagirirao, V and Palanikumar, K (2010) UNSPECIFIED In: International Conference on Frontiers in Automobile and Mechanical Engineering (FAME 2010), Chennai.