Article

Ashokkumar, S and Thiagarajan, C and Jose, Hitheshu and Aswin Murali, P and Jacob, Akhil Reji (2020) Investigation of EDM machining parameters of different volume fraction of WC/Ni composites. IOP Conference Series: Materials Science and Engineering, 993 (1). 012015. ISSN 1757-8981

Ashokkumar, S. and Sundar Singh Sivam, S.P. and Balasubramanian, S. and Nanditta, R.V. (2021) Effects of process variables optimization on the quality of parts processed in high speed single point incremental sheet metal forming by ranking algorithm. Materials Today: Proceedings, 45. pp. 1707-1712. ISSN 22147853

Ganesan, R. (59577738900) and Somasundaram, K. (57196055256) (2019) Petrol quality analysis for different level of adulteration using thermal imaging and GLCM features.

Imthiyas, A and Saravanan, M and Kumar, Praveen and Richard Meclar, F and Satyanarayan, D K (2020) Design of Muskmelon Seed Peeling machine. IOP Conference Series: Materials Science and Engineering, 993 (1). 012032. ISSN 1757-8981

Imthiyas, A. and Mahesh, R. and Eldho, Emin and Baby, Nevin and Hariprasath, N S (2021) Design and Fabrication of Automatic Squeezing Machine for Food Industries. Journal of Physics: Conference Series, 2040 (1). 012013. ISSN 1742-6588

Jayappa, Pradeep and Srinivasan, Santhosh and Vetrivel Murugan, K. and Thangavel, C. and Bala Theja, M. and Phanindra Raja Varma, G. and Marichamy, S. and Subbiah, Ram (2022) An overview on role of unconventional machining processes on different materials. Materials Today: Proceedings, 50. pp. 1341-1345. ISSN 22147853

Kalyanakumar, S and Prabhu, L and Saravanan, M and Imthiyas, A (2020) Experimental investigation of MRR, RA of 304 stainless steel using WEDM. IOP Conference Series: Materials Science and Engineering, 993 (1). 012035. ISSN 1757-8981

Kalyanakumar, S. and Chandy, Sam T. and Adil Muhammed, K.T. and Rohith, P.S. (2021) Multi-response optimization of machining parameters of turning operation with green environment in EN24T using grey relational analysis in Taguchi method. Materials Today: Proceedings, 45. pp. 6193-6197. ISSN 22147853

Kalyanakumar, S. and Munikumar, C. and Govind Nair, S. and Shaju, Sam (2021) Application of multi response optimization of drilling setting main process parameter using VIKOR approach. Materials Today: Proceedings, 45. pp. 6099-6102. ISSN 22147853

Kalyanakumar, S. and Natarajan, S. and Prabhahar, M. and Saravanakumar, Manickam Puratchiveeran and Sudhakaran, P. and Suresh, Nidhin (2025) TRUST-Based Optimization of High-Performance Machining Process Parameters of Aluminum for Enhanced Product Quality in Automotive Manufacturing. International Journal of Vehicle Structures and Systems, 17 (1). 104 - 114. ISSN 09753540; 09753060

Kumar, Sunil Ashok (59050294400) and Loganathan, Ganesh Babu (57222219720) and Shobana Swarna Ratna, P. R. (57207816485) and Balakumaran, G. (57207819925) and Sundar Singh Sivam, S. P. (55643758400) (2019) Determination of taguchi grey relation analysis to influence the tool geometry and cutting parameters of the Ti-6Al-4V alloy to achieve better product quality.

Kumaran, P. and Sathiyaraj, S. and Selva Babu, B. and Yogeswar, S. and Murugan, T. (2025) Design and Analysis of Hybrid Sandwich Layered Industrial Safety Helmet. Springer, 79. pp. 317-328. ISSN 2662-3161

Kumaran, P. and Sathiyaraj, S. and Selva Babu, B. and Yogeswar, S. and Murugan, T. Ponvel (2025) Design and Analysis of Hybrid Sandwich Layered Industrial Safety Helmet. Springer Proceedings in Materials, 79. 317 - 328. ISSN 26623161; 2662317X

Manu, Y. M. and Manepalli, Sailaja and Muthukumarasamy, S. and Jayaraman, R. and Jeeva, L. G. and Selvaraju, Mayakannan (2025) Optimization of Underwater Friction Stir Welding Parameters for AA5128 and AA 7075 Aluminum Alloy using Response Surface Methodology. International Journal of Vehicle Structures and Systems, 17 (3). 520 - 531. ISSN 09753540; 09753060

Muthukumar, S and Thiruchitrambalam, M (2020) Performance augmentation of machining centers by improving the overall equipment effectiveness in subsystems. IOP Conference Series: Materials Science and Engineering, 993 (1). 012024. ISSN 1757-8981

Prabhu, L. and Krishnamoorthi, Sangeetha and Akbar, Muhammed Adil and Mubashir, P and Prashob, P (2020) Design and fabrication of ball burnishing tool for surface finish. IOP Conference Series: Materials Science and Engineering, 993 (1). 012001. ISSN 1757-8981

Prabhu, L. and Kumar, Dr.S.Satish and Krishnamoorthi, Sangeetha and Prakash, S. (2019) Optimization of vibration parameters for boring bar operation by RSM and ANN. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2167-2176. ISSN 22498958

Prabhu, L. and Satish Kumar, S. and Dinakaran, D. and Jawahar, Raj (2020) Improvement of chatter stability in boring operations with semi active magneto-rheological fluid damper. Materials Today: Proceedings, 33. pp. 420-427. ISSN 22147853

Prabhu, Loganathan and Shanmugam, Satish and Chandrasekaran, Thiagarajan (2021) EFFECT OF TOOL PIN PROFILES OVER SQUARE WAVE TOOL PATH PATTERN ON FRICTION STIR WELDING OF AA6061-CU DISSIMILAR ALLOYS. Materiali in tehnologije, 55 (5). ISSN 1580-2949

Rabi, J. and Balusamy, T. and Raj Jawahar, R. (2019) Analysis of vibration signal responses on pre induced tunnel defects in friction stir welding using wavelet transform and empirical mode decomposition. Defence Technology, 15 (6). pp. 885-896. ISSN 22149147

Rajan, N. and Thanigaivelan, R. and Govindan Muthurajan, K. (2019) Machinability studies on an Al7075 composite with varying amounts of B4C using an induction-heated electrolyte in electrochemical machining. Materiali in tehnologije, 53 (6). pp. 873-880. ISSN 15802949

Rajaprakash, S. (56023839800) and Muthuselvan, S. (57203628671) and Karthik, K. (58238388600) and Somasundaram, K. (57196055256) and R, Jaichandran K. (36680018900) (2019) Design of suicide prediction system using intuitionistic fuzzy set.

Ramesh, R. and Mohan, S. and Sivakumar, N.S. and Bruhathi, M. and Arun Kumar, S. and Ramarao, M. and Marichamy, S. and Subbiah, Ram (2022) Experimental investigation of lost foam casting process on aluminium. Materials Today: Proceedings, 50. pp. 1134-1137. ISSN 22147853

Sankarganesh, R. (56419860500) and Senthamarai, S. (57221163279) (2020) State of the art and energy management system of lithium ion batteries in electric vehicle applications.

Saranya, K. and Haribabu, K. and Venkatesh, T. and Saravanan, K. G. and Maranan, Ramya and Rajan, N. (2024) Electrochemical machining parameter optimization and prediction of performance using artificial neural network. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (7). pp. 5015-5025. ISSN 1955-2513

Saravanan, M. and Vasanth, M. and Boopathi, Sampath and Sureshkumar, M. and Haribalaji, V. (2022) Optimization of Quench Polish Quench (QPQ) Coating Process Using Taguchi Method. Key Engineering Materials, 935. pp. 83-91. ISSN 1662-9795

Sathiyaraj, S. and S.Venkatesan and Mathew, Binson and SimsarulHaq, K. K. and Kumar, Prince (2024) Production of ECMM Micro-Holes on Brass C35335. Springer, 58. pp. 223-229. ISSN 2662-3161

Sathiyaraj, S. and Venkatesan, S. and Ashokkumar, S. and senthilkumar, A. (2020) Wire electrical discharge machining (WEDM) analysis into MRR and SR on copper alloy. Materials Today: Proceedings, 33. pp. 1079-1084. ISSN 22147853

Selva Babu, B. and Sathiyaraj, S. and Balaguru, G. and Nambu Selvam, S. (2025) Tool Condition Monitoring of Friction Stir Welding—A Machine Learning Approach. Science Talks, 79. pp. 243-250. ISSN 27725693

Selva Babu, B. and Sathiyaraj, S. and Ramesh, Anantha Krishnan P. and Afridi, B.A. and Kristo Varghese, K. (2021) Investigation of machining characteristics of aluminium 6061 by wire cut EDM process. Materials Today: Proceedings, 45. pp. 6247-6252. ISSN 22147853

Senthil, J. and Prabhahar, M. and Thiagarajan, C. and Prakash, S. and Lakshmanan, Ramalingam (2020) Studies on performance and process improvement of implementing novel vacuum process for new age castings. Materials Today: Proceedings, 33. pp. 813-819. ISSN 22147853

Srinivasan, V. P. and Sandeep, Ch. and Shanthi, C. and Bejaxhin, A. Bovas Herbert and Anandan, R. and Abisha Meji, M. and Barik, Debabrata (2022) Comparative Study on EDM Parameter Optimization for Adsorbed Si3N4–TiN using TOPSIS and GRA Coupled with TLBO Algorithm. Adsorption Science & Technology, 2022. ISSN 0263-6174

Thiagarajan, C. and J, Karthick. and Prakash, S. and Senthil, J. and Prabhahar, M. (2019) Effective Reduction in Utility Cost in A Beverage Plant. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2108-2112. ISSN 22498958

Thiruchitrambalam, M. and Prabahahr, M. and Prakash, S. and Zulfigar, Mohammed and Shaji, Abhishek and Sivasubramanian, Palanisamy (2024) Fabrication of Tampico-Reinforced Natural Rubber Composite and the Evaluation of Mechanical Properties. Springer, 58. pp. 203-211. ISSN 2662-3161

Viswanathan, G. and Praveen, R. and Prabhu, L. and Prakash, S. (2021) Evaluating the machining parameters for milling P20 HH mould steel using a specific end mill. Materials Today: Proceedings, 46. pp. 8248-8253. ISSN 22147853

Conference or Workshop Item

Ganesh, V. Dilli and Ayyadurai, M. and Vijay, J. and Malleni, Sai Praneeth and Tej, Genedi Tharun (2022) Process time reduction in fettling and grinding process using Mitsubishi robot. In: UNSPECIFIED.

Loganathan, Prabhu and Murugan, Praveen Athithya and Selvamani, Naveen Kumar and Rengarajan, Krishna Kumar and Antony Casmir Jayaseelan, George and Saranya, S. N. (2025) Optimization of electrochemical machining process parameters using artificial neural network. In: Optimization of electrochemical machining process parameters using artificial neural network.

Prabhahar, M. and Athitya, M. Praveen and Chitrambalam, M. Thiru and Prabhu, L. and Prakash, S. (2022) Experimental investigation of MS material in laser cutting machine using Taguchi method. In: UNSPECIFIED.

Prakash, S. and Subuhan, A. and Prabhu, L. and Prabhahar, M. (2022) Influence of surface roughness factor for manufacturing process parameters optimization of pure Titanium using wire cut electrical discharge machining. In: UNSPECIFIED.

Srinivasan, V. P. and Duraithilagar, S. and Dhanasekhar, S. and Abhishek, A. and Sundaravadivel, T. A. (2022) Optimization of electrical discharge machining process parameters of titanium alloy using Taguchi methodology. In: UNSPECIFIED.

Thiruchitrambalam, M. and Veerapandiyan, K. and Suresh, A. G. and Praveen, R. (2022) Effect of weaving architecture on the mechanical properties of polyester/eco-friendly lyocell composite. In: UNSPECIFIED.