Article

Anandavel, T.Thoshiba and Yuvabalakumaran, G. and Pravitha, B. and Sathiyanarayanan, R. and Sachin, S. (2025) ROLE OF MRI IN EVALUATION OF RING ENHANCING LESION IN BRAIN IN CORRELATION WITH MR SPECTROSCOPY. BULLETIN OF STOMATOLOGY AND MAXILLOFACIAL SURGERY. pp. 72-81. ISSN 1829-006X

Antony Casmir Jayaseelan, G. and Samuvel Michael, B. and Elanthiraiyan, A. and Arun Kumar, M. N. and Mohammed Iqbal, N. (2025) Effect oF Cu2O Nanoparticle in Candlenut Biodiesel Blends in CI Engine. Springer, 79. pp. 355-362. ISSN 2662-3161

Antony Casmir Jayaseelan, G. and Samuvel Michael, B. and Subathra, M. and Vinoth, K. and Babu, T. (2025) Effect of Dual Biodiesel Blends with Ethanol as Additives in CI Engine. Advancements in Materials Processing Technology, Volume 3 (AMPT 2023), 79. pp. 157-165. ISSN 2662-3161

Ashokkumar, S. and Prabhahar, M. and Arvind, S. and Dhanasekar, S. (2025) Finite Element Analysis of Hybrid Helical Gear Models with Carbon Fiber-Reinforced Polymer Composite for Weight Reduction. Springer, 79. pp. 167-178. ISSN 2662-3161

Balsingh, Samuvel Michael and Krishnamoorthi, Sangeetha and Prakash, S. and Babu, J. M. (2025) Analysis of Performance, Combustion Dynamics and Emission Profiles of a VCR Multi-Fuel Engine with Ethanol-Plastic Oil Blend. International Journal of Vehicle Structures and Systems, 17 (1). 1 - 9. ISSN 09753540; 09753060

Baruva, Yashoda and Sakthignanavel, Arulmozhi and Mohanam, Vikram Raj (2025) A Comparative Study of the Effectiveness of Antibiotic-Steroid Ointment Wick V/S Antibiotic-Steroid Drops Soaked Gel Foam in Pain Management of Otitis Externa. Indian Journal of Otolaryngology and Head and Neck Surgery, 77 (2). 797 - 802. ISSN 09737707; 22313796

Dhilipkumar, Thulasidhas and Sadeq, Abdellatif Mohammad and Shankar, Karthik V. and Murali, Arun Prasad and Karuppusamy, P. and K, Selvakumar and Giri, Jayant P. and Sabeur, Hassen (2025) Performance evaluation of dual-scale strengthened co-bonded single-lap joints using carbon nanotubes and Z-pins with ANN. Nanotechnology Reviews, 14 (1). ISSN 21919097; 21919089

Hariram, Venkatesan and Sathishbabu, R. and Godwin John, J. and Kailiappan, Nandagopal and Vijayakumar, K. and Kumar, E. Sangeeth and K, Kamakshi Priya (2025) Maximizing the combustion phenomenon with reduced emission of a compression ignition engine fulled with Dunaliella salina biodiesel and hydrogen blends. Scientific Reports, 15 (1). ISSN 20452322

Imthiyas, A. and MUSTHAFA, B. and Ashish, K. and Gobind, M. (2025) Prediction Model by Adaptive Neuro-Fuzzy Inference System of R600A Vapour Compression Refrigeration System Using Al2O3/TiO2 Composite Nanolubricants. Russian Journal of Physical Chemistry B, 19 (4). 953 - 960. ISSN 19907931; 19907923

Imthiyas, A. and Sathiyaraj, S. and Silambarasan, R. and Ramkumar, V. (2025) Preparation and Mechanical Characterization of TiC Particles Reinforced Al6061 Alloy Composites. Springer, 79. pp. 337-344. ISSN 2662-3161

Kalyanakumar, S. and Natarajan, S. and Prabhahar, M. and Saravanakumar, Manickam Puratchiveeran and Sudhakaran, P. and Suresh, Nidhin (2025) TRUST-Based Optimization of High-Performance Machining Process Parameters of Aluminum for Enhanced Product Quality in Automotive Manufacturing. International Journal of Vehicle Structures and Systems, 17 (1). 104 - 114. ISSN 09753540; 09753060

Krishnamoorthi, Sangeetha and L, Prabhu and M, Prabhahar and Mehaboob, Adil and Abdulla, Adil (2025) Optimization of biodiesel production from jatropha oil and its impact on engine performance and emissions using response surface methodology. Environmental Research and Technology, 8 (2). pp. 328-344. ISSN 2636-8498

Krishnamoorthi, Sangeetha and Thiagarajan, C. and Prabhahar, M. and Raghunathan, Anandhu K. and Deepak, P. V. (2025) Performance and Emission Characteristics of Soapnut Methyl Esters-Diesel Blends Between VCR and Tata Zip XL Engine. Springer Proceedings in Materials, 79. pp. 251-261. ISSN 2662-3161

Kumaran, P. and Sathiyaraj, S. and Selva Babu, B. and Yogeswar, S. and Murugan, T. (2025) Design and Analysis of Hybrid Sandwich Layered Industrial Safety Helmet. Springer, 79. pp. 317-328. ISSN 2662-3161

Kumudhavalli, M. V. and Gokul, S. and Keerthana, T. and Janarthanan, L. and Kumar, Mohan (2025) Phytochemical Profiling by Hyphenated Technique and Invitro Enzymatic Anti-Diabetic Activity of Ethanolic Extract of (Oryza sativa. L Indica). International Journal of Advancement in Life Sciences Research, 8 (1). 53 - 61. ISSN 25814877

MUSTHAFA, B. and Prabhahar, M. (2025) Experimental and numerical analysis of performance and emission characteristics of CI engine using Juliflora-Gulmohar biodiesel/blends and ANN prediction using MATLAB. Case Studies in Thermal Engineering, 72. ISSN 2214157X

Manibalan, Vimalraj and Ramani, Dhanesh and Bhat, Prajna J. (2025) Audiological profile of fishermen using fiber motor boats in Puducherry. International Maritime Health, 76 (1). 21 - 27. ISSN 16419251; 20813252

Parimala, Adepu Bathsheba and Shanmugasundaram, Ramasamy Seeranga Chettiar (2025) Liver tumour segmentation and classification using MV3CNN-KHO: a combination of multiparameterised inception V3 CNN and Krill Herd optimisation. International Journal of Computational Biology and Drug Design, 16 (3). 212 - 232. ISSN 17560756; 17560764

Parthiban, D. and Vijayan, D. S. and Arunachalam, S. and Kumar, Himanshu and Kumar, Bitu and Kumar, S. Naveen and Sankaran, Naveen (2025) Synergic Effect of Cashew Nutshell Ash as Partially Replaced Binding Material in Cement Concrete- an Experimental Study. Springer, 79. pp. 395-407. ISSN 2662-3161

Prabhahar, M. and Prakash, S. and Boobesh Kumar, P. and Kalidhasan, B. (2025) Enhanced Performance and Emission Characteristics of Soybean Biodiesel using TiO2 Nanoparticles in CRDI Engines: A Comprehensive Analysis. International Research Journal of Multidisciplinary Technovation, 7 (1). 203 - 218. ISSN 25821040

Prabhahar, M. and Prakash, S. and Dharsan, P. and Elumalai, P. V. and Xueyi, Fang and Hasan, Nasim (2025) Optimization of thermal barrier coating with induced copper oxide nanoparticles in CI engine using algae methyl ester as fuel. Scientific Reports, 15 (1). ISSN 20452322

Prabhahar, M. and Prakash, S. and Karpaga Vinayagam, B. and Dhanraj, T. and Zhang, Huaizhi (2025) Investigating the Impact of Oxygenated Additives (DEE, DME & MTBE) on Engine Performance and Emission Reductions in Simarouba Methyl Ester Blends. International Research Journal of Multidisciplinary Technovation, 7 (3). 112 - 123. ISSN 25821040

Rajasekaran, M and Krishnamoorthi, S and Vijayaragavan, M (2025) Experimental investigation of diethyl ether (DEE) blended jack fruit peel oil (JFP) with hydrogen as a secondary fuel in dual-fuel compression ignition engines. Environmental Science and Pollution Research, 32 (42). pp. 23810-23819. ISSN 09441344; 16147499

Rajasekaran, Mahesh and Krishnamoorthi, Sangeetha and Ganesh, P. Ravichandra and Vijayakumar, A. and Yugendran, S. (2025) Synergistic Enhancement of Diesel Engine Performance and Emissions through Jackfruit Peel Biodiesel Blends: An Experimental Investigation. International Journal of Vehicle Structures and Systems, 17 (1). 79 - 83. ISSN 09753540; 09753060

Saravanan, M and Krishnamoorthi, S and Rajaram, N and Saravanakumar, M (2025) Synthesis of Nano-Hydroxyapatite from Sea Shell and Squid Bone Waste for Advanced Bone Applications via Precipitation Process. SSRG International Journal of Mechanical Engineering, 12 (9). pp. 130-138. ISSN 23488360

Sathiyaraj, S. and Sendrayan, Venkatesan and Kumaran, P. and Prabhakaran, Balaji and Sourav Sreejith, K. M. (2025) Examining the Mechanical Properties of Al-SiC Metal Matrix Composites Produced Using the Stir Casting Method. Turkish Journal of Engineering, 9 (1). 21 - 27. ISSN 25871366

Selva Babu, B. and Bubesh Kumar, D. and Prabhu, L. and Sudhir Kumar Yadav, K. (2025) Microstructural Behaviour of Spark Plasma Sintered Carbon Nanotube + Ti6Al4V Nanocomposites. Springer, 79. pp. 435-442. ISSN 2662-3161

Selva Babu, B. and Sathiyaraj, S. and Balaguru, G. and Nambu Selvam, S. (2025) Tool Condition Monitoring of Friction Stir Welding—A Machine Learning Approach. Science Talks, 79. pp. 243-250. ISSN 27725693

Senthilkumar, A. and Selva Babu, B. and Pramanik, Manoj Kumar and Dubey, Nitiyanand (2025) Experimental Data and R600a Vapor Refrigerator Prediction Employing Al2O3/SiO2 Nanolubricants Adopting Adaptive Neuro-fuzzy Inference System Model. Predicting R600a Vapor Refrigerator Performance Using ANFIS with Al₂O₃/SiO₂ Nanolubricants, 79. pp. 139-146. ISSN 2662-3161

Shimray, Somipam R. and Subaveerapandiyan, A. (2025) Artificial Intelligence in Academic Writing and Research: Adoption and Effectiveness. Open Information Science, 9 (1). ISSN 2451-1781

Thiagarajan, C. and Krishnamoorthi, Sangeetha and Adithyan, P. and Ajmal, P. A. and Adwaith, M. P. (2025) Optimization and Tribological Behaviour of Stir Cast Aluminium MMC’s by Taguchi Method. Springer, 79. pp. 33-47. ISSN 2662-3161

Thiagarajan, C. and Prabhahar, M. and Senthil, J. and Vignesh, G. and Kumar, Suresh (2025) Efficient Biodiesel Production from Mahua Seed Oil Using Acid and Base-Catalysed Transesterification: Process Optimization and Quality Assessment. Advancements in Materials Processing Technology, Volume 3 (AMPT 2023), 79. pp. 213-223. ISSN 2662-3161

Venkatesh, R. and Upadhyay, Viyat Varun and Chinna Ram, G. and Mohanavel, Vinayagam and Vijayan, Dhanasingh Sivalinga and Sharma, Abhishek and Soudagar, Manzoore Elahi Mohammed and Fouly, Ahmed and Seikh, Asiful Hossain (2025) Hexachloroethane fluxing mechanism and actions of hybrid fillers on functional behaviour of AZ31B alloy composites. Journal of Mechanical Science and Technology, 39 (7). 3987 - 3992. ISSN 1738494X; 19763824

Vijayakumar, K. and Bubesh Kumar, D. and Parida, Sanjaya Kumar and Behera, Tutu (2025) Design and Development of an Upper Limb Exoskeleton with EMG Sensor-Based Control. Springer, 79. pp. 297-305. ISSN 2662-3161

ntony Casmir Jayaseelan, G,A,C and Ashim, M.A.P and Srinivas, S and Rajendran, P (2025) Experimental Investigation and Central Composite Design Modeling Optimization of Dual Biodiesel Mixture in CI Engine Parameters. Russian Journal of Physical Chemistry B, 19 (4). pp. 953-960. ISSN 19907931; 19907923

Conference or Workshop Item

Ashokkumar, R. and Ganesh Babu, L. and Magesh Babu, D. and Sellamuthu, P. and Sivaraman, Gopal and Karthikeyan, R. (2025) Enhancing Renewable Energy Penetration with Combined Heat and Power Units and Cryogenic Energy Storage. In: Enhancing Renewable Energy Penetration with Combined Heat and Power Units and Cryogenic Energy Storage.

Kalyanakumar, S. and Sengodan, Natarajan and Jeyaseelan, Antony Casmir and Sundaran, Abijith and Nair, Karthik Raveendran (2025) Optimizing face milling parameters for high-speed machining of AA6061 aluminum alloy: A central composite design approach for enhanced performance. In: Optimizing face milling parameters for high-speed machining of AA6061 aluminum alloy: A central composite design approach for enhanced performance.

Ranganathan, Chitra Sabapathy and Arokiaraj Jovith, A. and Selvarani, P. and Saravana Kumar, S. and Sujatha, S. and Niranjan Kumar, K. A. (2025) IoT-Driven Green Building Materials and Life Cycle Assessment with Gradient Boosting Machines. In: IoT-Driven Green Building Materials and Life Cycle Assessment with Gradient Boosting Machines.