UNSPECIFIED (2024) Characterization and optimization studies of cellulose based bioplastics extracted from Musa paradisiaca L. Global NEST Journal. ISSN 1790-7632

Amuthan, Tamilselvan and Nagaprasad, Nagaraj and Somurajan, Vijayan and Gupta, Nakul and Kumar, Ramakrishnan Kulasekaran Sathish and Krishnaraj, Ramaswamy and Raj, Vijilius Helena and Srinivas, R. and Saxena, Kuldeep K. and Deshmukh, Sujata (2024) Optimization to release net zero emission in built environment from newly developed natural fiber–hybrid composite. Innovation and Emerging Technologies, 11. ISSN 2737-5994

Arularasan, R. and Balaji, D. and Garugu, Srisudha and Jallepalli, Venkateswara Rao and Nithyanandh, S and Singaram, Gokulakannan (2024) Enhancing Sign Language Recognition for Hearing-Impaired Individuals Using Deep Learning. In: UNSPECIFIED.

Babu, B. Selva and Kalyanakumar, S. and Kumar, Saket (2024) Mechanical Characteristics of Silicon Carbide and Palm Kernel Shell Ash-Reinforced Ultrasonic Hybrid-Assisted Cast Aluminium Matrix Composites. Springer, 58. pp. 193-201. ISSN 2662-3161

Chandrasekharan, Thiagarajan and Muthuswamy, Prabhahar and Karthikeyan, Sivakumar and Jayapalan, Senthil and Haneefa, Anees and Babu, Amal Suresh (2024) Investigating the performance characteristics of mahua oil based biodiesel as an alternative fuel for a CRDI diesel engine with EGR. In: UNSPECIFIED.

Dhilipkumar, Thulasidhas and Arumugam, Soundhar and Rajesh, Murugan and Venkatesan, Raja and Sasikumar, R. and Al-Asbahi, Bandar Ali (2024) Evaluating the flexural and vibrational response of carbon nanotube strengthened co-cured sandwich composites. Carbon Letters, 34 (5). pp. 1443-1452. ISSN 1976-4251

Dhilipkumar, Thulasidhas and Rajesh, Murugan and Sathyaseelan, P. and Sasikumar, R. and Murali, Arun Prasad (2024) Evaluating structural strength and vibrational characteristics of silicon carbide incorporated adhesively bonded single lap joints. Journal of Adhesion Science and Technology, 38 (16). pp. 2959-2972. ISSN 0169-4243

Dhilipkumar, Thulasidhas and Vasumathi, M. and Begum, S. Rashia and Sathyaseelan, P. and Gnanavel, B. K. and Ghfar, Ayman A. (2024) Evaluation of Acoustic and Structural Behavior of Banana Fiber Reinforced Polymer Composites. Fibers and Polymers, 25 (6). pp. 2303-2314. ISSN 1229-9197

Dhilipkumar, Thulasidhas and Venkatesan, Raja and Hiremath, Vinayak S. and Kesavan, S. and P, Karuppusamy and Shankar, Karthik V. and Alduhaish, Osamah (2024) Enhancing structural performance of 3D‐printed adhesively bonded flat‐joggle‐flat polymer joints with graphene‐reinforced adhesive. Polymer Composites, 45 (17). pp. 16335-16346. ISSN 0272-8397

Dhilipkumar, Thulasidhas and Venkatesan, Raja and Kim, Seong-Cheol and P, Karuppusamy and Murali, Arun Prasad and Shankar, Karthik V. and Almutairi, Tahani Mazyad (2024) Assessing the structural and free vibrational performance of areca/ ramie fibre composite reinforced with graphene nanofiller. Industrial Crops and Products, 222. p. 119599. ISSN 09266690

Guru Mahesh, Gadham Setty and Vijayan, D.S. and Sivakumar, K. and Kavitha, N. and Arumugam, Vengatesan and Damodara Reddy, A. and Rajesh, S. (2024) A Review of the Mechanical Properties of Biochar-Reinforced Aluminium 7075/SiC Composites. Journal of Physics: Conference Series, 2837 (1). 012050. ISSN 1742-6588

Imthiyas, A. and Sathiyaraj, S. and Sanjay, K. P. and Mohammad Nadir, A. J. and Mukhil Murali, M. (2024) Micro-hole Formation Characteristics of C35600 Alloy Using Laser Drilling. Springer, 58. pp. 411-418. ISSN 2662-3161

Jayaraman, R. and Sivalingam, A. and Rahul, S. and Prabaharan, V. and Nanthakumar, S. and Hasane Ahammad, Sk. and Girimurugan, R. (2024) Square Pyramid and Single Slope Solar Still: Experimental Analysis for Various Depth of Water. Springer. pp. 29-39. ISSN 2195-4356

Jayaseelan, G. Antony Casmir and Mahesh, R. and Sarath, M. J. and Arjun Ram, V. and Raj, Vyshak (2024) Dispersion and Effect of Nanoparticle in Soapnut Biodiesel and Its Performance Analysis. Springer, 58. pp. 419-427. ISSN 2662-3161

Kalyanakumar, S. and Natarajan, S. and Muthusamy, Prabhahar and Saravanakumar, M. (2024) Influence of Pre-Aging Treatment and Process Parameters Effects of Mechanical Properties in AA 6061- T6 By Ranking Algorithm and ANOVA Methods. International Journal of Vehicle Structures and Systems, 16 (3). ISSN 0975-3060

Kalyanakumar, S. and Natarajan, S. and Saravanakumar, M. and Sahadevan, Ashwin and Eggen, P. T. and Hrishikesh, N. (2024) Optimizing Machining Performance of Heat-Treatable Aluminum Alloys Through MQL Condition Parameter Turning in High-Speed Machining. Springer, 58. pp. 243-251. ISSN 2662-3161

Karthick, L. and K., Senthil Kumar and Vadivukarasi, L. and Hasan, Dler Salih and Nagarajan, L. and Aarthi, R. (2024) Advanced Electronic Healthcare Application Using Mechanical Renewable Energy for Long-Term Population. Springer. pp. 283-300. ISSN 2328-8205

Kaushik, Nitish and Sandeep, Ch and Srinivasan, V. P. and Prakash, B. Vijaya and Kalaiarasan, S. and Arunkumar, S. (2024) Polyethylene Sheet Dispersion and Optical Constant Changes Due to Electron Beam Irradiation. In: UNSPECIFIED.

Khawale, Vijay Ramrao and Jadhav, Varsha D. and Satishkumar, P. and Vijayan, D. S. and Saminathan, Rajasekaran (2024) Mechanical characterization of extruded sisal-polypropylene composites with optimized compounding parameters. Interactions, 245 (1). ISSN 3005-0731

Kumar, M. Saravana and Prabhahar, M. and Ajithkumar, B. and Guhan, P. and Ramesh, Aravind and Kumar, T. S. Athithya (2024) A Comprehensive Investigation of the Electric Two-Wheeler Fabrication Process from Conventional to Cutting-Edge Approach. Springer, 58. pp. 275-283. ISSN 2662-3161

Kumaran, P. and Sathiyaraj, S. and Salim, Adith and Unnikrishnan, Asish and Boyapati, Rajesh (2024) Mechanical Behavior of GFRP with Plantain, Coir, and Sugarcane Fiber-Reinforced Hybrid Composite. Springer, 58. pp. 181-192. ISSN 2662-3161

Kwankaew, Pattamaporn and Sangkanu, Suthinee and Mitsuwan, Watcharapong and Boonhok, Rachasak and Lao-On, Udom and Tabo, Hazel L. and Mahboob, Tooba and Pereira, Maria de Lourdes and Tangpong, Jitbanjong and Sundar, Shanmuga S. and Wiart, Christophe and Nissapatorn, Veeranoot (2024) Inhibitory and anti-adherent effects of Piper betle L. leaf extract against Acanthamoeba triangularis in co-infection with Staphylococcus aureus and Pseudomonas aeruginosa: A sustainable one-health approach. Veterinary World. pp. 848-862. ISSN 09728988

M, Prabhahar and S, Prakash and S, Nallusamy and S, Ponnarasu and Reddy, Yeddula Deekeshwar (2024) Optimization of Operating Factors and Blending Levels of Diesel, Algae Methyl Ester, Graphene Oxide and Producer Gases - Calorific Values Using Response Surface Methodology in HCCI Engine. International Journal of Mechanical Engineering, 11 (1). pp. 1-15. ISSN 23488360

Mahesh, R. and Sangeetha, S. and Michael, B. Samuvel and Rishikesh, K. and Shabu, Roshan A. and Krishnan, P. Akshay (2024) Examination on Characteristics Features of Papaya Seed Biodiesel Emissions in VCR Engine Using Various Nozzles. Springer, 58. pp. 285-293. ISSN 2662-3161

Mahesh, R. and Senthilkumar, A. and Antony Casmir Jayaseelan, G. and Sooraj, K. and Sayooj, P. and Punnoose, Alvin Mathews (2024) Laser Micromachining—An Overview. Springer, 58. pp. 213-221. ISSN 2662-3161

Manivannan, A. and Sasikumar, R. and Nithyanandam, T. and Ganesan, C. (2024) Quantitative and Qualitative Analysis of Advanced Aluminum Composites for Heat Transfer Properties. Transactions of the Indian Institute of Metals, 77 (11). pp. 3413-3423. ISSN 0972-2815

Nasir Bashir, Muhammad and Logesh, K. and Kannan, Sathish and Vijayan, D.S. and Suresh Kumar, S. and Al Obaid, Sami and Sang Lee, Joon (2024) Studies on parametric optimization of PLA/graphene composites synthesized by fused filament fabrication for thermal applications. Thermal Science and Engineering Progress, 54. p. 102788. ISSN 24519049

P, Kumaran and Sengodan, Natarajan and M P, Sudesh Kumar and A, Anderson and S, Prakash (2024) Investigating the emissions and performance of ethanol and biodiesel blends on Al2O3 thermal barrier coated piston engine using response surface methodology design - multiparametric optimization. Environmental Research and Technology, 7 (3). pp. 406-421. ISSN 2636-8498

Pachaiyappan, Kumaran and Sengodan, Natarajan and Sekar, Prakash and Ramalingam, Vasanthraj and Periyasamy, Saranraj (2024) Enhancing Combustion Efficiency: Utilizing Graphene Oxide Nanofluids as Fuel Additives with Tomato Oil Methyl Ester in CI Engines. Turkish Journal of Engineering, 8 (4). pp. 720-728. ISSN 2587-1366

Prabhu, L. and Baskaran, T. and Krishnamoorthi, Sangeetha and Saravanan, M. (2024) Dissimilar Metal Welds and Weld Joint Analysis for Duplex with Super Duplex Stainless Steel Plate Joint by Semi-automatic TIG Welding. Springer, 58. pp. 387-397. ISSN 2662-3161

Prabhu, L. and Krishnamoorthi, Sangeetha and Prakash, S. and Ashok, Akshay and Vishnu, P. V. (2024) Development of Computerized Shell-and-Tube Heat Exchanger System in Co-Current, Counter-Current Mode, and Cross-Flow Type. Springer, 58. pp. 327-335. ISSN 2662-3161

Prakash, S. and Prabhahar, M. and Abdul Kalam, V. and Naveen Kumar, G. and Prabhakaran, D. (2024) Investigated the Effect of Laser Cutting Parameters on Ti6al4v Cut Quality Using the RSM. Springer, 58. pp. 253-263. ISSN 2662-3161

Prakash, S. and Suresh, P. and Sasikumar, R. and Suresha, B. (2024) Superior Mechanical Properties of Aluminium Matrix Composites Fabricated through Modified Matrix Encapsulated Feeding Method. Transactions of the Indian Institute of Metals, 77 (3). pp. 707-716. ISSN 0972-2815

Rajasekaran, Mahesh and Krishnamoorthi, Sangeetha and Vijayaragavan, Mathanraj (2024) An experimental investigation of the effects of blending camphor oil infused with jack fruit biodiesel and nanoparticles on the performance, combustion, and exhaust emissions of a compression ignition engine. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Rasheed, Raffik and Jayalingam, Karthikeyan and Muthuswamy, Prabhahar and Muddisetty, Harishkumar and Oyebode, Oluwadare Joshua (2024) Analysis of changing trends in blended wing body aircraft design. In: UNSPECIFIED.

Rasheed, Raffik and Rajagopal, Navaneetha Krishnan and Prabhahar, Muthuswamy and Kathirvelu, Bhaskar and Subramanian, Sendilvelan and Singh, Prabhdeep (2024) Automated vehicles and motion planning techniques. In: UNSPECIFIED.

Ravindran, Deepthi Ramya and Kannan, Suganya and Marudhamuthu, Murugan (2024) Fabrication and characterisation of human gut microbiome derived exopolysaccharide mediated silver nanoparticles – An in-vitro and in-vivo approach of Bio-Pm-AgNPs targeting Vibrio cholerae. International Journal of Biological Macromolecules, 256. p. 128406. ISSN 01418130

Sahare, Shilpa B. and Jadhav, Varsha D. and Satishkumar, P. and Vijayan, D. S. and Saminathan, Rajasekaran (2024) Performance analysis of Jute/Kenaf fiber polyester hybrid composites for non-structural applications. Interactions, 245 (1). ISSN 3005-0731

Sankaran, Ganesh and Venkatesan, S. (2024) Powering Up India: Exploring the Adoption of Standardized Battery Packs in Electric Passenger Vehicles. International Journal of Vehicle Structures and Systems, 16 (2). ISSN 0975-3060

Saravana Kumara, M. and Kalyanakumar, S. and Prabhahar, M. and Mathew, Job. K. Sam and babu, Bijith and Nitin, P. S. (2024) Application of Response Surface Methodology to Optimize Cutting Process Parameters in Aluminum Silicon Alloy Drilling. Springer, 58. pp. 265-273. ISSN 2662-3161

Saravanan, M. and Kumar, M. Saravana and Venu, Akhil and Oommen, Alan Sam and Arjun, K. S. (2024) Smart Mechatronic Incinerator: A Sustainable Solution for Controlled Waste Combustion and Emission Management in IoT Environment. Springer, 58. pp. 305-315. ISSN 2662-3161

Saravanan, M. and Venkatesan, V. and Prabhu, L. and Krishnamoorthi, Sangeetha (2024) Study of Mechanical Behavior and Wear Characteristics of Aluminum Alloy 7178–Fly Ash Composites. Springer, 58. pp. 231-241. ISSN 2662-3161

Sathish Kumar, Ramakrishnan Kulasekaran and Sasikumar, Rathinasabapathy and Nagaprasad, Nagaraj and Ezhilvannan, Rathinam and Krishnaraj, Ramaswamy and Randhawa, Kawaljit Singh (2024) Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite. Advances in Materials Science and Engineering, 2024. pp. 1-9. ISSN 1687-8434

Sathiyaraj, S. and Jayaseelan, G. Antony Casmir and Arunprasanth, S. and Divakar, R. and Veeramani, B. (2024) Design and Fabrication of Manual Drive Centrifugal Screw Conveyor Water Pump. Springer, 58. pp. 317-325. ISSN 2662-3161

Sathiyaraj, S. and S.Venkatesan and Mathew, Binson and SimsarulHaq, K. K. and Kumar, Prince (2024) Production of ECMM Micro-Holes on Brass C35335. Springer, 58. pp. 223-229. ISSN 2662-3161

Sendilvelan, Subramanian and Gomathi, Kannayiram and Sassykova, Larissa and Prabhahar, Muthuswamy (2024) PORT INJECTION OF DIESEL, BIODIESEL, AND PETROL IN A COMPRESSION IGNITION DIRECT INJECTION DIESEL ENGINE TO MITIGATE NITROGEN OXIDES AND SOOT EMISSIONS. Journal of Chemical Technology and Metallurgy, 59 (3). pp. 623-632. ISSN 1314-7471

Senthil, J. and Kumar, Manisaravana and Thiagarajan, C. and Prabhahar, M. (2024) Synthesis and Evaluation of Zircon and Al2O3 Zircon-Reinforced AA6061 Alloy Composites in Age-Hardened Condition. Springer, 58. pp. 337-350. ISSN 2662-3161

Senthil, J. and Thiagarajan, C. and Prabhahar, M. and Mathew, Ashik John and Shaji, Melvin and Ajmal, Mohamed (2024) Performance and Emission Characteristics of Variable Compression Ratio Diesel Engines Fuelled with Safflower Seed Oil Blends. Springer, 58. pp. 429-439. ISSN 2662-3161

Senthilkumar, A. and Prabhu, L. and Chandran, Sarath and Jose, Jestin Sam and Kumar, T. Nirmal Raj (2024) Design and Modelling of Swimwagon Prototype Utilizing L298 Module Arduino. Springer, 58. pp. 377-386. ISSN 2662-3161

Surendrababu, K. and Michael, B. Samuvel and Prabhahar, M. and Sukesan, Abhijith and Suresh, Adarsh and Suresh, Nidhin (2024) Fabrication of Screw Pump for Hydraulic Applications. Springer, 58. pp. 359-368. ISSN 2662-3161

Surendrababu, K. and Prabhahar, M. and Prakash, S. and Naveen Kumar, B. and Sapthasarathy, C. and Gowthaman, K. (2024) Exhaust Gas Recirculation Method to Impact the Di Diesel Engine Running on Pumpkin Seed Oil Methyl Ester. Springer, 58. pp. 399-409. ISSN 2662-3161

Suresh Kumar, K and Mohanraj, K and Raja, Muhammadu Sathik and Arul, M and Hussain, Beporam Iftekhar and Nanthakumar, S and Devarajan, R (2024) Development and characterization of Fe-30Cu-10Si-6W-10Mo superalloy with enhanced γ′ phase stability and oxidation resistance using CALPHAD method. Journal of Physics: Conference Series, 2925 (1). 012011. ISSN 1742-6588

Thiagarajan, C. and Prabhahar, M. and Prakash, S. and Karthick Raja, M. and Kumar, D. and Thangapandiyan, A. (2024) Performance and Emissions Characteristics of Algae Oil Methyl Ester with Different Methanol Injection Positions in Dual-Fuel Engine. Springer, 58. pp. 295-303. ISSN 2662-3161

Thiruchitrambalam, M. and Prabahahr, M. and Prakash, S. and Zulfigar, Mohammed and Shaji, Abhishek and Sivasubramanian, Palanisamy (2024) Fabrication of Tampico-Reinforced Natural Rubber Composite and the Evaluation of Mechanical Properties. Springer, 58. pp. 203-211. ISSN 2662-3161

Thiruchitrambalam, M. and Prabhahar, M. and Prakash, S. and Antony Rahul, P. W. and Arun Dev, A. and Varghese, Eldho (2024) A Review on Recycling of Waste PET Plastics for Manufacturing Composite Materials. Springer, 58. pp. 351-358. ISSN 2662-3161

Varthanan, P. Ashoka and Rajesh, A. and Sandeep, Ch. and Shanthi, C. and Josh, F. T. and Arunkumar, S. and Jayaraman, P. and Kumar, G. Naveen (2024) Optimization of the shot peening process parameters to improve the flexural strength of heated 2024 aluminium alloy. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (7). pp. 4729-4735. ISSN 1955-2513