Article

Bagath Basha, C. and Rajaprakash, S. and Nithya, M. and Sunitha, C. and Karthik, K. (2023) The Security Algorithm BR22-01 Used to Secure the COVID’19 Health Data. Scopus, 1719. pp. 345-354. ISSN 1865-0929

Kalpana, M. and Nagalakshmi, R. (2023) Effect of reaction temperature and pH on structural and morphological properties of hydroxyapatite from precipitation method. Journal of the Indian Chemical Society, 100 (4). p. 100947. ISSN 00194522

Muthuselvan, S. and Rajaprakash, S. and Lakshmi Priya, H. and Davis, Albin and Ali, Ameer and Ashik, V. (2023) Determining the Attribute Priority Among the Maintenance and Support Phases in Software Development Phases Using Intuitionistic Fuzzy Analytical Hierarchy Process. Scopus, 313. pp. 191-205. ISSN 2190-3018

Rajaprakash, S. and Muthuselvan, S. and Jaichandaran, R. and Sai Nithankumar, M. and Sai Rathankumar, M. and Gupta, Vishal Kumar (2023) The Security Algorithm ES-BR22-001 Used to Secure the Health Data. Scopus, 579. pp. 549-557. ISSN 2367-3370

Vijayan, Dhanasingh Sivalinga and Devarajan, Parthiban and Sivasuriyan, Arvindan (2023) A review on eminent application and performance of nano based silica and silica fume in the cement concrete. Sustainable Energy Technologies and Assessments, 56. p. 103105. ISSN 22131388

Conference or Workshop Item

Ashokkumar, S. and Kalyanakumar, S. and Sudalai, K. Chembalai and Gajendrean, E. and Reddy, N. Jagan Mohan (2023) Experimental investigation and performance analysis of an electric green bicycle as a measure of zero emission. In: UNSPECIFIED.

Ashokkumar, S. and Surendrababu, K. and Lokesh, S. and Balaji, S. and Rathinasamy, Kishore (2023) Study of size effect of reinforcement and mechanical properties of Al-SiC composite. In: UNSPECIFIED.

Babu, B Selva and Sathiyaraj, S and Libin, Y and Mithun, M S and Midhun, K (2023) Production of ECMM micro holes on brass Cz108. In: UNSPECIFIED.

Babu, B. Selva and Saravanan, M. and Krishna, Sangaraju Vamsi and Reddy, Aluru Visweswar and Kumar, Thamalam Prasanth (2023) Effect of almond shell on glass fiber reinforced polymer composites. In: UNSPECIFIED.

Babu, B. Selva and Sathiyaraj, S. and Varun, P. and Thomas, Alan and Vivek, V. (2023) An experimental analysis and optimization of machining rate & surface characteristics in WEDM of phosphor bronze using Taguchi's method. In: UNSPECIFIED.

Bubeshkumar, D. and Elanthiraiyan, A. and Balaji, K. and Surya, M. Deva (2023) Finite element analysis of electric three wheeler vehicle. In: UNSPECIFIED.

Elanthiraiyan, A and Kumar, S Ashok and Adarsh, A C and Akshay, P P and Akshay, S (2023) Wear analysis of TiAlN coated carbide tool in lathe. In: UNSPECIFIED.

Elanthiraiyan, A. and Kumar, S. Ashok and Dhinesh, S. and Vence V., Aldo and Jebin C., Donic (2023) Mechanical evolution of sisal and sugarcane fibres reinforced composites. In: UNSPECIFIED.

Enthil, J. S. and Thiagarajan, C. and Prabhahar, M. and George, Kevin and Mathew, Sachin A. and James, Rony Abraham (2023) Experimental investigations on mechanical and thermo mechanical properties of chicken feather/pineapple leaf fiber reinforced poly lactic acid (PLA) matrix bio composites. In: UNSPECIFIED.

G, Selvaraj and S, Rajaprakash and R, Mariappan (2023) Artificial Intelligence Related Healthcare Doctor Assistant and Consulting for Subscription-Based Applications. In: UNSPECIFIED.

Imthiyas, A. and Bubeshkumar, D. and Sathyanarayanan B. R. and Hariharasudhan G. and Yashwanthraj M. (2023) A review on usage of composite materials in the field of automobile industry. In: UNSPECIFIED.

Jayaseelan, G. Antony Casmir and Thiruchitrambalam, M. and Joseph, Judeson and Mathew, Bince and Subramani (2023) Study of various nano particle additives and its impact in CI engine. In: UNSPECIFIED.

K, Boopathy and C, Amegh Chandra and Sasi C, Sravan and Shajahan, Muhammed (2023) Design of Multipurpose Robot for Sugarcane Field Using Blue Tooth Technology. In: UNSPECIFIED.

Kalyanakumar, S. and Elanthiraiyan, A. and Sreekanth, S. and John, Shijo and Afsal, K. E. (2023) Process optimization of parameters for minimizing vibrations and surface roughness during hard steel by ranking algorithm. In: UNSPECIFIED.

Kalyanakumar, S. and Natarajan, S. and Anilkumar, Abhiram and Jose, Aby and Adarsh, K. S. (2023) Effects on cutting tool nose radius and machining parameters optimization on surface roughness, tool wear during turning using central composite. In: UNSPECIFIED.

Kalyanakumar, S. and Prabhu, L. and Kabir, Ashik M. (2023) Experimental investigation on thermal assisted machining process of mild steel using CBN tools. In: UNSPECIFIED.

Kalyanakumar, S. and Thiagarajan C. and Vishnu V. and Nair, Sreeju S. and Varghese, Willium Mathew (2023) Analysis of process parameter in cylindrical grinding using multi objective optimizaton of hot work steels. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhahar, M. and Hassan, Shazzat Ali Mohammed and Imam, Fazil and Ahmad, Faizan (2023) Design and analysis of a gas turbine blade by using FEM. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhu L. and Kannan, Hithul and Pradhyoth Y. S. and Thiruvarangan M. (2023) Design & deployment of surveillance bot using Raspberry Pi & IoT. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhu L. and Prasad M. K., Hari and Kuriyakose P. and Shuhaib, P. (2023) FEA analysis of exhaust system. In: UNSPECIFIED.

Kumar, D. Bubesh and Babu, B. Selva and Dhamu, V. (2023) Finite element analysis of nano ceramics and nano titanium metal matrix composites. In: UNSPECIFIED.

Kumar, M. Saravana and Prakash, S. and Kumaraguru, R. and Rasheed, Ahsen and Kalayath, Yasir Husain (2023) Effect of methanol and lemon grass biodiesel in a compression ignition engine. In: UNSPECIFIED.

Kumaran, P. and Praveen R. and Sreerang K. U. and Prabhuraj M. S. and Iraianbu C. (2023) Experimental investigation on wire-electro discharge machining of titanium grade 9 using RSM-central composite design. In: UNSPECIFIED.

Mahesh, R. and Vijayakumar, K. and Harish, R. and Prakash, V. Arun and Karthik, R. (2023) Emission analysis of yellow oleander seed biodiesel in variable compression ratio engine. In: UNSPECIFIED.

Mahesh, R. and Vijayakumar, K. and Shanty, Hansal and Ambadan, Elroy G. and Aseem, S. (2023) Investigation of emission characteristic of coriander seed biodiesel in VCR engine at various compression ratios. In: UNSPECIFIED.

Michael, B. Samuvel and Saravanakumar, M. and Jebaz M., Sam and Ajith K. and Reang, Marjin (2023) Design and fabrication of FMS based line follower guided vehicle. In: UNSPECIFIED.

Prabhu, L. and Krishnamoorthi, Sangeetha and Kumar, Amal A. and Mathew, Amith and Babu, Brezen (2023) Design and development of electronic switching inelectro magnetic engine. In: UNSPECIFIED.

Prabhu, L. and Prabhakar, S. and Thomas, Leo Philips and Kumar J., Madhan and Joseph, Georgie Juddy (2023) Design and fabrication of mobile spy robot. In: UNSPECIFIED.

Prakash, S. and Lakshminarayanan, N. and Ashif C., Muhammed and Nadirsha N. S., Mohammed and Naidu, Ravada Manoj (2023) Meshing of IC engine and meromorphic quadratic differential application using automatic mesh generation. In: UNSPECIFIED.

Praveen, R. and Imthiyas, A. and Jassim, K. S. and Menon, Abijith K. and Kumar, T. Vishnu Anil (2023) Dynamic analysis of impeller vane in centrifugal pump for maximum efficiency using Flotran. In: UNSPECIFIED.

Praveen R. and Kumaran, P. and Anandu S. and Gokulprasath S., Gnana and Karthickraja N. (2023) Aerodynamic and flow optimization in turbo charger nozzle using ansys CFX. In: UNSPECIFIED.

Praveen R. and Shivakumar, N. and Alen Joseph, K. B. and Pasha, Ammar Ahmed and V. Anith, M. (2023) Design and fabrication of remotely controlled ultraviolet disinfectant robot. In: UNSPECIFIED.

Ranjith, K. B. and Krishnamoorthi, Sangeetha and Prabhu L. and Thayananthan, E. (2023) Recycling of scrap in fixture industries. In: UNSPECIFIED.

Sarala, S. and Geetha, E. and Mageswari, M. and Madhavi, M. Radha (2023) Effects of heat and mass transmission with radiation on MHD nanofluid flow past over an oscillating plate using chemical reaction. In: UNSPECIFIED.

Saravanan, M. and Jayaseelan, Antony Casmir and Sourab V. and Sourav P. V. and Rakesh Babu R. (2023) Experimental investigation of hybrid composite material for AQUA silencers. In: UNSPECIFIED.

Sathiyaraj, S and Mahesh, R and Ahamed, Arshid and Harikrishnan, P and Sudhan K., Hari Hara (2023) Process optimization and production improvement of injection moulding by wire brush buffing process. In: UNSPECIFIED.

Sathiyaraj, S. and Samuvel, B. Michael and Ameer, Mishal and Marwan N., Mohammed and Naseef PK, Mohammed (2023) Design and fabrication of welding machine with magnetically impelled arc butt (MIAB). In: UNSPECIFIED.

Sathiyaraj S. and Krishnamoorthi, Sangeetha and Vyshakh M. and Kumar P. S., Akshay and Aswin K. (2023) Automation in pneumatic oil dipping mechanism with two hand operation and fully advanced confirmation arrangements to enable safety and quality. In: UNSPECIFIED.

Sebi, Alan and Biju, Biyon and Joy K., Godfree and Shobana R. and Shalini, K. Shantha (2023) Smart voting system using face recognition and fingerprint module. In: UNSPECIFIED.

Senthil, J. and Prabhahar, M. and Vijay, Sri Garhil and Shriyan, Manoj G. and Hareesh P. (2023) Experimental investigation and optimization using Taguchi method and shorea biodiesel on VCR engine. In: UNSPECIFIED.

Senthil, J. and Thiagarajan, C. and Sunil, Anand P. and Amrithapreetham T. S. and Ananthu T. K. (2023) Analysis on water absorption characteristics of chemically treated and untreated jute fiber/coconut husk particle reinforced hybrid bio-composites. In: UNSPECIFIED.

Shivakumar N. and Babu, B. Selva and Peause, Akshay V. and Tom, Jacob and Bavan, Gokul (2023) Effective control of fuel rail pressure and injection timing using NXP 33816 kit. In: UNSPECIFIED.

Shivakumar N. and Prabhu, L. and Nair, Govind S. and Nair, Akhil S. and Krishnan, Prasoon S. (2023) Effective design and development of selective catalytic reactor towards cost and NOx reduction. In: UNSPECIFIED.

Shivakumar N. and Vijayakumar K. and Surendran, Akshay and Jose, Chris and Mahmood V. K., Safa (2023) Impact of blended fuels with split injections on combustion and emission characteristics of spray guided mode modified GDI engine. In: UNSPECIFIED.

Sundhari, Guna and Babu, D. Vijendra (2023) Embedded and machine learning based flood monitoring system using IoT. In: UNSPECIFIED.

Thiagarajan, C and Sheryashan and Surendrababu, K. (2023) Design and analysis of seat & seat frames - Cost and weight optimization. In: UNSPECIFIED.

Thiagarajan, C. and Kumaran, P. and Jose, Jeevan Mathew and Jose, Jelwin and Jishnu, K. P. (2023) The effect of different fiber loading on flexural and thermal properties of banana/pineapple leaf/glass hybrid composites. In: UNSPECIFIED.

Thiagarajan, C. and Mahesh R. and Marray, Pe Eshaq and Imdadulla M., Mohammed and Nabeel, Mohamed (2023) Analysis of delamination failure in banana-coir fiber reinforced PLA matrix composites through Taguchi optimization technique. In: UNSPECIFIED.

Thiagarajan, C. and Prabhahar, M. and Ali Khan, Abdul Bazith and Sanjay, Abel and Abhijith, U. (2023) Effect of ferric oxide nanoparticle (Fe2O3) and waste transformer oil in a compression ignition engine. In: UNSPECIFIED.

Thiagarajan, C. and Senthil, J. and Prabhahar, M. and Sindhuraj S. and Natarajan R. and Vasanth G. (2023) Experimental investigation and parameter influence on VCR engine using Jojoba biodiesel fuel. In: UNSPECIFIED.

Vijayakumar, K. and Jayaseelan, G. Antony Casmir and Shakil O. V., Mohammed and Asharaf M. J., Muhammed and Nafeel V. C., Muhammed (2023) Multi-objective optimization of electrochemical micromachining of copper alloy by response surface methodology. In: UNSPECIFIED.

Vijayakumar, K. and Kumar, D. Bubesh and Kumar, Aravind S. and Daniel, Ashish and Haripal, J. L. (2023) Design and fabrication of Exoskeleton robotic arm. In: UNSPECIFIED.

Vijayakumar, K. and Shivakumar, N. and Yogeshwaran G. and Zakir, Mohammed Shahal P. and Nabeel, Mohammed (2023) Experimental investigation of radish seed oil blend with diesel in VCR engine. In: UNSPECIFIED.

Vijayakumar, K. and Thiruchitrambalam, M. and Arshid Pk, Muhammed and Shihad P., Muhammed and Rahman, Sohaib S. (2023) Evaluation of mechanical properties of alkaline treated natural fiber PMC. In: UNSPECIFIED.

kumar, D. Bubesh and Imithiyas, A. and Sampath, Sachin and Gohain, Reshav and Kumar, Navneet (2023) Finite element analysis of tibial bone plate. In: UNSPECIFIED.

kumar, D. Bubesh and Saravanan, M. and Selvamanthiram, G. and Suresh, V. and Uthayaraj, J. (2023) Finite element anaysis of screw plate for HIP implants. In: UNSPECIFIED.