Article

Krishnamoorthi, Sangeetha and Prabhu, L. and Rahil, Md. and Nagasai, Kollimarla and Faim, Md. (2025) Experimental Investigation of Diesel Engine Using Chlorella Algae-Acetylene by Dual Fuel Mode. Springer, 79. pp. 69-79. ISSN 2662-3161

Krishnamoorthi, Sangeetha and Prabhu, L. and Rahil, Mohammad and Nagasai, Kollimarla and Faim, Md (2025) Experimental Investigation of Diesel Engine Using Chlorella Algae-Acetylene by Dual Fuel Mode. Springer Proceedings in Materials, 79. 69 - 79. ISSN 26623161; 2662317X

Selva Babu, B. and Bubesh Kumar, D. and Prabhu, L. and Sudhir Kumar Yadav, K. (2025) Microstructural Behaviour of Spark Plasma Sintered Carbon Nanotube + Ti6Al4V Nanocomposites. Springer, 79. pp. 435-442. ISSN 2662-3161

Senthilkumar, A. and Prabhu, L. and Chandran, Sarath and Jose, Jestin Sam and Kumar, T. Nirmal Raj (2024) Design and Modelling of Swimwagon Prototype Utilizing L298 Module Arduino. Springer, 58. pp. 377-386. ISSN 2662-3161

Prabhu, L. and Krishnamoorthi, Sangeetha and Prakash, S. and Ashok, Akshay and Vishnu, P. V. (2024) Development of Computerized Shell-and-Tube Heat Exchanger System in Co-Current, Counter-Current Mode, and Cross-Flow Type. Springer, 58. pp. 327-335. ISSN 2662-3161

Prabhu, L. and Baskaran, T. and Krishnamoorthi, Sangeetha and Saravanan, M. (2024) Dissimilar Metal Welds and Weld Joint Analysis for Duplex with Super Duplex Stainless Steel Plate Joint by Semi-automatic TIG Welding. Springer, 58. pp. 387-397. ISSN 2662-3161

Saravanan, M. and Venkatesan, V. and Prabhu, L. and Krishnamoorthi, Sangeetha (2024) Study of Mechanical Behavior and Wear Characteristics of Aluminum Alloy 7178–Fly Ash Composites. Springer, 58. pp. 231-241. ISSN 2662-3161

Yin, Peng and Prabhu, L. and Saranya, S.N. and Devanesan, Sandhanasamy and Alsahi, Mohamad S. and Anderson, A. and Praveenkumar, T.R. (2023) Effects of Scenedesmus dimorphus, spirulina biodiesel, hydrogen and nanoparticles fuel blends on mass burn fraction, emission, noise and vibration characteristics. Fuel, 352. p. 129010. ISSN 00162361

Senthilkumar, A. and Prabhu, L. and Sathish, T. and Saravanan, R. and Casmir Jeyaseelan, G.Antony and Ağbulut, Ümit and Mahmoud, Z. and Shaik, Saboor and Ahamed Saleel, C (2023) Enhancement of R600a vapour compression refrigeration system with MWCNT/TiO2 hybrid nano lubricants for net zero emissions building. Sustainable Energy Technologies and Assessments, 56. p. 103055. ISSN 22131388

Prabhu, L. and Dhanalakshmi, K. and Alahmadi, Tahani Awad and Alharbi, Sulaiman Ali and Sołowski, Gaweł and Veeman, Dhinakaran (2023) How Do Microalgae Biodiesel Blends Affect the Acoustic and Vibration Characteristics of the Direct Injection Diesel Engine: An Experimental Examination. Journal of Energy Resources Technology, 145 (11). ISSN 0195-0738

Prabhu, L. and Selvakumar, V. and Anderson, A. and Dhavamani, C. (2023) Influence of CNT fillers on the thermal, mechanical and shape memory properties of TPI shape memory polymer composites. Digest Journal of Nanomaterials and Biostructures, 18 (1). pp. 299-305. ISSN 18423582

Karthikeyan, P. and Prabhu, L. and Bhuvaneswari, B. and Yokesvaran, K. and Jerin, A. and Saravanan, R. and Raghuvaran, S. and Negash, Kassu and Sharma, Shubham and Barik, Debabrata (2023) Influences of Various Thermal Cyclic Behaviours on Thermo Adsorption/Mechanical Characteristics of Epoxy Composite Enriched with Basalt Fiber. Adsorption Science & Technology, 2023. ISSN 0263-6174

Krishnamoorthi, Sangeetha and Prabhahar, M. and Prakash, S. and Prabhu, L. and Bhaskar, K. and Suku, Akhil V. and Shijindas, K. P. and Sooraj, S. L. and Haiter Lenin, A. and Jappes, J. T. Winowlin (2023) Investigation of Magnesium and Chromium Fillers FSW Dissimilar Joint of AA6063 and AA 5154. Advances in Materials Science and Engineering, 2023. pp. 1-13. ISSN 1687-8434

Prabhu, L. and Shenbagaraman, S. and Anbarasu, A. and Muniappan, A. and Suthan, R. and Veza, Ibham (2023) Prediction of the Engine Performance and Emission Characteristics of Glycine Max Biodiesel Blends With Nanoadditives and Hydrogen. Journal of Energy Resources Technology, 145 (11). ISSN 0195-0738

Prabhu, L. and Saravanan, R. and Anderson, A. and Senthilkumar, A. and Aneesh, V. N. and Malladi, Avinash and Krishnan, A. Mohana and Majora, Manaye and Barik, Debabrata (2023) Synthesis, Thermal Adsorption, and Energy Storage Calibration of Polysulfone Nanocomposite Developed with GNP/CNT Nanofillers. Adsorption Science & Technology, 2023. ISSN 0263-6174

Krishnamoorthi, Sangeetha and Prabhu, L. and Kuriakose, Glen and Jose lewis, Dave and Harikrishnan, J. (2021) Air-cooling system based on phase change materials for a vehicle cabin. Materials Today: Proceedings, 45. pp. 5991-5996. ISSN 22147853

Venkataramanan, A.R. and Subramaniyan, Madheswaran and Kumar, S. Lakshamana and Jawahar, R. Raj and Prabhu, L. (2021) Application of CCD in RSM to obtain optimize treatment of tribological characteristics of WC-10Co-4Cr nanoceramic thermal spray coating. Materials Today: Proceedings, 45. pp. 6160-6170. ISSN 22147853

Krishnamoorthi, Sangeetha and Prabhu, L. and Shadan, MD and Raj, Harsh and Akram, Nadeem (2021) Design and analysis of electric Go-Kart. Materials Today: Proceedings, 45. pp. 5997-6005. ISSN 22147853

Herald Lessly, S. and Lakshmana Kumar, S. and Raj Jawahar, R. and Prabhu, L. (2021) Durability properties of modified ultra-high performance concrete with varying cement content and curing regime. Materials Today: Proceedings, 45. pp. 6426-6432. ISSN 22147853

Shanmugavel, K. and Lakshmana Kumar, S. and Saranya, S.N. and Prabhu, L. (2021) Effect of process parameters of (Cr3C2 + alumina) thermal spray coating on tribological control factors. Materials Today: Proceedings, 45. pp. 6400-6405. ISSN 22147853

Viswanathan, G. and Praveen, R. and Prabhu, L. and Prakash, S. (2021) Evaluating the machining parameters for milling P20 HH mould steel using a specific end mill. Materials Today: Proceedings, 46. pp. 8248-8253. ISSN 22147853

Prabhu, L. and Krishnamoorthi, Sangeetha and Gokul, P and Sushan, Nandhu and Hisham Harshed, P H and Jose, Aviss (2020) Aerodynamics analysis of the car using Solidworks flow simulation with rear spoiler using CFD. IOP Conference Series: Materials Science and Engineering, 993 (1). 012002. ISSN 1757-8981

Prabhu, L. and Krishnamoorthi, Sangeetha and Akbar, Muhammed Adil and Mubashir, P and Prashob, P (2020) Design and fabrication of ball burnishing tool for surface finish. IOP Conference Series: Materials Science and Engineering, 993 (1). 012001. ISSN 1757-8981

Antony Casmir Jayaseelan, G. and Anderson, A. and Prabhu, L. and Srinivasan, V. (2020) Impact of cerium oxide nanoadditives on the performance and emission characteristics of candlenut biodiesel. Materials Today: Proceedings, 33. pp. 890-894. ISSN 22147853

Prabhu, L. and Satish Kumar, S. and Dinakaran, D. and Jawahar, Raj (2020) Improvement of chatter stability in boring operations with semi active magneto-rheological fluid damper. Materials Today: Proceedings, 33. pp. 420-427. ISSN 22147853

Prabhu, L. and Prakash, S. and Aadithya, Praveen (2019) CFD Analysis of Shrouded Diffuser Wind Turbine. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2100-2104. ISSN 22498958

R, Praveen. and Prabhu, L. and Khatri, Pranjal and Mistry, Niranjan Kumar and Mondal, Sahid (2019) Design and Analysis of Gearless Drive System. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2105-2107. ISSN 22498958

Prabhu, L. and Kumar, Dr.S.Satish and Krishnamoorthi, Sangeetha and Prakash, S. (2019) Optimization of vibration parameters for boring bar operation by RSM and ANN. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2167-2176. ISSN 22498958

Krishnamoorthi, Sangeetha and Prabhu, L. and R, Sakthikumar (2019) Performance and Emission Characteristics of Cashewnut Shell Liquid as Alternate Fuel with Five Hole Nozzle. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2117-2119. ISSN 22498958

Loganathan, S. and Leenus Jesu Martin, M. and Nagalingam, B. and Prabhu, L. (2018) Heat release rate and performance simulation of DME fuelled diesel engine using oxygenate correction factor and load correction factor in double Wiebe function. Energy, 150. pp. 77-91. ISSN 03605442

Conference or Workshop Item

Prabhu, L. and Krishnamoorthi, Sangeetha and Kumar, Amal A. and Mathew, Amith and Babu, Brezen (2023) Design and development of electronic switching inelectro magnetic engine. In: UNSPECIFIED.

Prabhu, L. and Prabhakar, S. and Thomas, Leo Philips and Kumar J., Madhan and Joseph, Georgie Juddy (2023) Design and fabrication of mobile spy robot. In: UNSPECIFIED.

Prabhu, L. and Krishnamoorthi, Sangeetha and Joseph, Jackson and George, Jerish K. and Naveen P. (2023) Development of advanced 3D printing technology in automotive industry. In: UNSPECIFIED.

Shivakumar N. and Prabhu, L. and Nair, Govind S. and Nair, Akhil S. and Krishnan, Prasoon S. (2023) Effective design and development of selective catalytic reactor towards cost and NOx reduction. In: UNSPECIFIED.

Sathiyaraj, S. and Prabhu, L. and Kumar, Padam and Subash, S. and Ali, P. T. Ihjas and Abhay, M. (2023) Enhancement of heat transfer in tubular heat exchanger. In: UNSPECIFIED.

Kalyanakumar, S. and Prabhu, L. and Kabir, Ashik M. (2023) Experimental investigation on thermal assisted machining process of mild steel using CBN tools. In: UNSPECIFIED.

Prabhakar, S. and Ravikrishnan, Ganesh Bharathi and Prabhu, L. (2023) Investigation of emission characteristics for Cu/ZSM-5 SCR catalyst in the DI-diesel engine. In: UNSPECIFIED.

Prabhahar, M. and Athitya, M. Praveen and Chitrambalam, M. Thiru and Prabhu, L. and Prakash, S. (2022) Experimental investigation of MS material in laser cutting machine using Taguchi method. In: UNSPECIFIED.

Prakash, S. and Subuhan, A. and Prabhu, L. and Prabhahar, M. (2022) Influence of surface roughness factor for manufacturing process parameters optimization of pure Titanium using wire cut electrical discharge machining. In: UNSPECIFIED.