Article

Prakash, S. and Prabhahar, M. and null, null and null, null and Aravind, S. (2025) CFD Simulation of Heat Transfer Analysis Thermal Effect of Phase Change Materials in Buildings. Springer Proceedings in Materials, 79. 93 - 102. ISSN 26623161; 2662317X

Prakash, S. and Prabhahar, M. and Kumar, M. Saravana and Tholkappiyan, K. and Aravind, S. (2025) CFD Simulation of Heat Transfer Analysis—Thermal Effect of Phase Change Materials in Buildings. Springer, 79. pp. 93-102. ISSN 2662-3161

Ashokkumar, S. and Natarajan, S. and Prabhahar, M. and Sivabalan, M. and Ravichandran, G. (2025) A Comparative Analysis of Heat Transfer in Elliptical and Straight Slot Cross-Sectional Spiral Pipes at Varying Fluid Velocities Using CFD Methodology Toward Efficiency. Springer, 79. pp. 363-372. ISSN 2662-3161

Ashokkumar, S. and Natarajan, S. and Prabhahar, M. and null, null and null, null (2025) A Comparative Analysis of Heat Transfer in Elliptical and Straight Slot Cross-Sectional Spiral Pipes at Varying Fluid Velocities Using CFD Methodology Toward Efficiency. Springer Proceedings in Materials, 79. 363 - 372. ISSN 26623161; 2662317X

Senthil, J. and Prabhahar, M. and Thiagarajan, C. and Nallusamy, S. and Prakash, S. (2025) Effect of Metal Oxide Nano Liquid on Diesel/Plastic Oil Mixture Diesel Engine Performance. International Journal of Engineering Trends and Technology, 73 (2). 166 - 176. ISSN 23490918; 22315381

Thiagarajan, C. and Prabhahar, M. and Senthil, J. and Vignesh, G. and Kumar, Suresh (2025) Efficient Biodiesel Production from Mahua Seed Oil Using Acid and Base-Catalysed Transesterification: Process Optimization and Quality Assessment. Advancements in Materials Processing Technology, Volume 3 (AMPT 2023), 79. pp. 213-223. ISSN 2662-3161

Thiagarajan, C. and Prabhahar, M. and Senthil, J. and Vignesh, Ganesan and null, null (2025) Efficient Biodiesel Production from Mahua Seed Oil Using Acid and Base-Catalysed Transesterification: Process Optimization and Quality Assessment. Springer Proceedings in Materials, 79. 213 - 223. ISSN 26623161; 2662317X

Prabhahar, M. and Prakash, S. and Boobesh Kumar, P. and Kalidhasan, B. (2025) Enhanced Performance and Emission Characteristics of Soybean Biodiesel using TiO2 Nanoparticles in CRDI Engines: A Comprehensive Analysis. International Research Journal of Multidisciplinary Technovation, 7 (1). 203 - 218. ISSN 25821040

MUSTHAFA, B. and Prabhahar, M. (2025) Experimental and numerical analysis of performance and emission characteristics of CI engine using Juliflora-Gulmohar biodiesel/blends and ANN prediction using MATLAB. Case Studies in Thermal Engineering, 72. ISSN 2214157X

Ashokkumar, S. and Prabhahar, M. and null, null and Dhanasekar, S. (2025) Finite Element Analysis of Hybrid Helical Gear Models with Carbon Fiber-Reinforced Polymer Composite for Weight Reduction. Springer Proceedings in Materials, 79. 167 - 178. ISSN 26623161; 2662317X

Ashokkumar, S. and Prabhahar, M. and Arvind, S. and Dhanasekar, S. (2025) Finite Element Analysis of Hybrid Helical Gear Models with Carbon Fiber-Reinforced Polymer Composite for Weight Reduction. Springer, 79. pp. 167-178. ISSN 2662-3161

Saravanakumar, M. and Prabhahar, M. and Prakash, S. and Hari Krishnan, H. R. and Vijay, B. N. (2025) Improvement of a Battery Pack Enclosure Fabricated from a Polymer Composite Material for Electric Vehicles. Springer Proceedings in Materials, 79. 287 - 296. ISSN 26623161; 2662317X

Saravana Kumar, M. and Prabhahar, M. and Prakash, S. and Hari Krishnan, H. R. and Vijay, B. (2025) Improvement of a Battery Pack Enclosure Fabricated from a Polymer Composite Material for Electric Vehicles. Springer, 79. pp. 287-296. ISSN 2662-3161

Prabhahar, M. and Prakash, S. and Karpaga Vinayagam, B. and Dhanraj, T. and Zhang, Huaizhi (2025) Investigating the Impact of Oxygenated Additives (DEE, DME & MTBE) on Engine Performance and Emission Reductions in Simarouba Methyl Ester Blends. International Research Journal of Multidisciplinary Technovation, 7 (3). 112 - 123. ISSN 25821040

Thiagarajan, C. and Prabhahar, M. and Senthil, J. and Prakash, S. and Nallusamy, S. (2025) Investigation of the Performance and Emissions of a Single-Cylinder Diesel Engine Fueled with Mahua Pyro Oil Mixtures Using ETBE as an Oxygenated Additive. SSRG International Journal of Mechanical Engineering, 12 (2). 48 - 57. ISSN 23488360

Prabhahar, M. and Prakash, S. and Dharsan, P. and Elumalai, P. V. and Xueyi, Fang and Hasan, Nasim (2025) Optimization of thermal barrier coating with induced copper oxide nanoparticles in CI engine using algae methyl ester as fuel. Scientific Reports, 15 (1). ISSN 20452322

Krishnamoorthi, Sangeetha and Thiagarajan, C. and Prabhahar, M. and Raghunathan, Anandhu K. and Deepak, P. V. (2025) Performance and Emission Characteristics of Soapnut Methyl Esters-Diesel Blends Between VCR and Tata Zip XL Engine. Springer Proceedings in Materials, 79. pp. 251-261. ISSN 2662-3161

Krishnamoorthi, Sangeetha and Thiagarajan, C. and Prabhahar, M. and Raghunathan, Anandhu K. and Deepak, P. V. (2025) Performance and Emission Characteristics of Soapnut Methyl Esters-Diesel Blends Between VCR and Tata Zip XL Engine. Springer Proceedings in Materials, 79. 251 - 261. ISSN 26623161; 2662317X

Kalyanakumar, S. and Natarajan, S. and Prabhahar, M. and Saravanakumar, Manickam Puratchiveeran and Sudhakaran, P. and Suresh, Nidhin (2025) TRUST-Based Optimization of High-Performance Machining Process Parameters of Aluminum for Enhanced Product Quality in Automotive Manufacturing. International Journal of Vehicle Structures and Systems, 17 (1). 104 - 114. ISSN 09753540; 09753060

Saravana Kumara, M. and Kalyanakumar, S. and Prabhahar, M. and Mathew, Job. K. Sam and babu, Bijith and Nitin, P. S. (2024) Application of Response Surface Methodology to Optimize Cutting Process Parameters in Aluminum Silicon Alloy Drilling. Springer, 58. pp. 265-273. ISSN 2662-3161

Kumar, M. Saravana and Prabhahar, M. and Ajithkumar, B. and Guhan, P. and Ramesh, Aravind and Kumar, T. S. Athithya (2024) A Comprehensive Investigation of the Electric Two-Wheeler Fabrication Process from Conventional to Cutting-Edge Approach. Springer, 58. pp. 275-283. ISSN 2662-3161

Surendrababu, K. and Prabhahar, M. and Prakash, S. and Naveen Kumar, B. and Sapthasarathy, C. and Gowthaman, K. (2024) Exhaust Gas Recirculation Method to Impact the Di Diesel Engine Running on Pumpkin Seed Oil Methyl Ester. Springer, 58. pp. 399-409. ISSN 2662-3161

Surendrababu, K. and Michael, B. Samuvel and Prabhahar, M. and Sukesan, Abhijith and Suresh, Adarsh and Suresh, Nidhin (2024) Fabrication of Screw Pump for Hydraulic Applications. Springer, 58. pp. 359-368. ISSN 2662-3161

Prakash, S. and Prabhahar, M. and Abdul Kalam, V. and Naveen Kumar, G. and Prabhakaran, D. (2024) Investigated the Effect of Laser Cutting Parameters on Ti6al4v Cut Quality Using the RSM. Springer, 58. pp. 253-263. ISSN 2662-3161

Senthil, J. and Thiagarajan, C. and Prabhahar, M. and Mathew, Ashik John and Shaji, Melvin and Ajmal, Mohamed (2024) Performance and Emission Characteristics of Variable Compression Ratio Diesel Engines Fuelled with Safflower Seed Oil Blends. Springer, 58. pp. 429-439. ISSN 2662-3161

Thiagarajan, C. and Prabhahar, M. and Prakash, S. and Karthick Raja, M. and Kumar, D. and Thangapandiyan, A. (2024) Performance and Emissions Characteristics of Algae Oil Methyl Ester with Different Methanol Injection Positions in Dual-Fuel Engine. Springer, 58. pp. 295-303. ISSN 2662-3161

Thiruchitrambalam, M. and Prabhahar, M. and Prakash, S. and Antony Rahul, P. W. and Arun Dev, A. and Varghese, Eldho (2024) A Review on Recycling of Waste PET Plastics for Manufacturing Composite Materials. Springer, 58. pp. 351-358. ISSN 2662-3161

Senthil, J. and Kumar, Manisaravana and Thiagarajan, C. and Prabhahar, M. (2024) Synthesis and Evaluation of Zircon and Al2O3 Zircon-Reinforced AA6061 Alloy Composites in Age-Hardened Condition. Springer, 58. pp. 337-350. ISSN 2662-3161

Tamil Selvan, P. and Sassykova, Larissa R. and Bhaskar, K. and Sendilvelan, S. and Kannayiram, Gomathi and Prabhahar, M. and Prakash, S. (2023) EFFECT OF SATURATED FATTY ACID COMPOSITION OF BIODIESEL ON OXIDES OF NITROGEN AND SMOKE EMISSIONS.

Krishnamoorthi, Sangeetha and Prabhahar, M. and Prakash, S. and Prabhu, L. and Bhaskar, K. and Suku, Akhil V. and Shijindas, K. P. and Sooraj, S. L. and Haiter Lenin, A. and Jappes, J. T. Winowlin (2023) Investigation of Magnesium and Chromium Fillers FSW Dissimilar Joint of AA6063 and AA 5154. Advances in Materials Science and Engineering, 2023. pp. 1-13. ISSN 1687-8434

Prabhahar, M. and Alharbi, Sulaiman Ali and Almoallim, Hesham S. and Prakash, S. and Saravana Kumar, M. and Surendrababu, K. and Sendilvelan, S. and Bhaskar, K. and Maroušek, Josef and Anderson, A. (2023) Trade-off characteristic between soot and oxides of nitrogen emission with pre-injected diesel and biodiesel in a SICI-CIDI engine. Fuel, 331. p. 125624. ISSN 00162361

Prakash, S. and Prabhahar, M. and Saravana Kumar, M. (2022) Experimental analysis of diesel engine behaviours using biodiesel with different exhaust gas recirculation rates. International Journal of Ambient Energy, 43 (1). pp. 1508-1517. ISSN 0143-0750

Prakash, S. and Abdul Favas, C. S. and Ameeth Basha, I. and Venkatesh, R. and Prabhahar, M. and Durairaj, V. P. and Gomathi, K. and Lenin, Haiter and Adam, Khan M. (2022) Investigation of Mechanical and Tribological Characteristics of Medical Grade Ti6al4v Titanium Alloy in Addition with Corrosion Study for Wire EDM Process. Advances in Materials Science and Engineering, 2022. pp. 1-10. ISSN 1687-8434

Prabhahar, M. and Gomathi, K. and Venkatesh, R. and Stalany, V. Mago and Vijayan, D. S. and Sassykova, Larissa R. and Sendilvelan, S. and Priya, V. Shanmuga and Jijina, G. O. and Selvaraj, Rabin and Alsohaimi, Ibrahim H. (2022) Isothermic and Kinetic Study on Removal of Methylene Blue Dye Using Anisomeles malabarica Silver Nanoparticles: An Efficient Adsorbent to Purify Dye-Contaminated Wastewater. Adsorption Science & Technology, 2022. ISSN 0263-6174

Surendrababu, K. and Muthurajan, K. G. and Prabhahar, M. and Prakash, S. and Saravana Kumar, M. and Jayakumar, Mani and Chelladurai, Samson Jerold Samuel (2022) Performance, Emission, and Study of DI Diesel Engine Running on Pumpkin Seed Oil Methyl Ester with the Effect of Copper Oxide Nanoparticles as an Additive. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Prabhahar, M. and Kannayiram, Gomathi and Prakash, S. and Saravanakumar, M. and Krishnamoorthi, Sangeetha and Sendilvelan, S. and Rahul Senthan, P. and Ashikmon, T. S. and Karthik, M. and Lenin, Haiter and Alsohaimi, Ibrahim H. (2022) Physicochemical Characterization of Star Anise Silver Nanoparticles Incorporated Chitosan Biomaterial for Absorb Water and Cure Wounds. Adsorption Science & Technology, 2022. ISSN 0263-6174

Prabhahar, M. and K, Gomathi and S, Prakash and S, Sendilvelan and M, Saravana Kumar and GO, Jijina and Varuvel, Edwin Geo and Lenin A, Haiter and Rene, Eldon R. (2022) [Retracted] A Study on Glycyrrhiza glabra‐Fortified Bread: Predicted Glycemic Index and Bioactive Component. Bioinorganic Chemistry and Applications, 2022 (1). ISSN 1565-3633

Prabhahar, M. and Prakash, S. and Saravana Kumar, M. and Sendilvelan, S. and Sreerag, M. V. and Akhil Vishnu, B. S. and Samad, Asif and Rani, B. Jansi and Allasi, Haiter Lenin and Haile, Adisu and Issac, Praveen Kumar and Ravindran, Balasubramani (2022) [Retracted] Copper Oxide Nanoparticles Incorporated in the Metal Mesh Used to Enhance the Heat Transfer Performance of the Catalytic Converter and to Reduce Emission. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Bhaskar, K. and Sassykova, L.R. and Prabhahar, M. and Shebha Percis, E. and Nalini, A. and Jenish, T. and Jayarajan, J. and Sendilvelan, S. (2021) Analysis of Cymbopogon Citratus, Pinus sylvestris and Syzygium cumini biodiesel feedstocks for its fatty acid composition. Materials Today: Proceedings, 45. pp. 5970-5977. ISSN 22147853

Bhaskar, K. and Jayabalakrishnan, D. and Vinoth Kumar, M. and Sendilvelan, S. and Prabhahar, M. (2021) Analysis on mechanical properties of wood plastic composite. Materials Today: Proceedings, 45. pp. 5886-5891. ISSN 22147853

Joseph, R. Edwin and Kanya, N. and Bhaskar, K. and Xavier, J. Francis and Sendilvelan, S. and Prabhahar, M. and Kanimozhi, N. and Geetha, S. (2021) Analysis on productivity improvement, using lean manufacturing concept. Materials Today: Proceedings, 45. pp. 7176-7182. ISSN 22147853

Zahir Hussain, M. and Anbalagan, R. and Jayabalakrishnan, D. and Naga Muruga, D.B. and Prabhahar, M. and Bhaskar, K. and Sendilvelan, S. (2021) Charging of car battery in electric vehicle by using wind energy. Materials Today: Proceedings, 45. pp. 5873-5877. ISSN 22147853

Prabhahar, M. and Lakshminarayanan, N. and Muhammed, K.A. and Vishnu, M.K. and Varghese, Vijin (2021) Design of automobile car seat vibration analysis due to road excitation using CATIA. Materials Today: Proceedings, 45. pp. 6287-6291. ISSN 22147853

Thiruchitrambalam, M. and Suresh, A.G. and Shanmugam, D. and Prabhahar, M. (2021) Dynamic mechanical behavior and Fractography of Lyocell fabric - polyester composite. Materials Today: Proceedings, 45. pp. 6094-6098. ISSN 22147853

Krishnamoorthi, Sangeetha and Prabhahar, M. and Madhavan, V. and Pragathish, T. and Johnson, F. (2021) Effect of variation in injector nozzle holes on the performance of preheated Spirulina methyl ester used in VCR engine. Materials Today: Proceedings, 45. pp. 5840-5846. ISSN 22147853

Muthu, V. and Bhaskar, K. and Pavan, P. and Jayabalakrishnan, D. and Prabhahar, M. (2021) Experimental investigation on a two stroke SI engine to optimize fuel consumption through electronic ignition. Materials Today: Proceedings, 45. pp. 5965-5969. ISSN 22147853

Vijayakumar, K.R. and Jayaseelan, J. and Ethiraj, N. and Prabhahar, M. and Bhaskar, K. and Jayabalakrishnan, D. and Sendilvelan, S. and Krishnamoorthi, Sangeetha (2021) Investigation on aluminium/mild steel plates bonded polyurethane sheets to control vibration. Materials Today: Proceedings, 45. pp. 5860-5867. ISSN 22147853

Ganesh, P. and Visagan, A. and Ethiraj, N. and Prabhahar, M. and Sendilvelan, S. (2021) Optimization of pyramid shaped single point incremental forming of AA5052 alloy sheet. Materials Today: Proceedings, 45. pp. 5892-5898. ISSN 22147853

Bhaskar, K. and Sassykova, L.R. and Prabhahar, M. and Kiani Deh Kiani, M. and Gomathi, K. and Sendilvelan, S. (2021) Oxides of nitrogen and soot trade-off characteristics of methyl esters in a hybrid mode compression ignition engine. Materials Today: Proceedings, 45. pp. 5847-5852. ISSN 22147853

Bhaskar, K and Sassykova, L.R. and Prabhahar, M. and Percis, E. Sheeba and Nalini, A. and Jenish, T. and Jayarajan, J. and Jayabalakrishnan, D. and Sendilvelan, S. and Krishnamoorthi, Sangeetha (2021) Resistance Heated Catalytic Converter (RHCC) with copper oxide catalyst for reducing HC/CO emission from automobile. Materials Today: Proceedings, 45. pp. 5868-5872. ISSN 22147853

Jayabalakrishnan, D. and Naga Muruga, D.B. and Bhaskar, K. and Pavan, P. and Balaji, K. and Rajakumar, P.S. and Priya, C. and Deepa, R.A.B. and Sendilvelan, S. and Prabhahar, M. (2021) Self-Healing materials–A review. Materials Today: Proceedings, 45. pp. 7195-7199. ISSN 22147853

Shakiyeva, T.V. and Sassykova, L.R. and Dzhatkambayeva, U.N. and Zhakirova, N.K. and Prabhahar, M. and Sendilvelan, S. and Ganesan, M. and Jaya Chitra, N. and Hari, Rajeswari (2021) Studying the regularities of oxidative catalytic cracking of vacuum distillates. Materials Today: Proceedings, 45. pp. 6028-6034. ISSN 22147853

Anbalagan, R. and Hussain, M. Zahir and Jayabalakrishnan, D. and Naga Muruga, D.B. and Prabhahar, M. (2021) Vehicle to vehicle data transfer and communication using LI-FI technology. Materials Today: Proceedings, 45. pp. 5925-5933. ISSN 22147853

Thiruchitrambalam, M. and Logesh, M. and Shanmugam, D. and Prabhahar, M. and Prakash, S. (2020) Aerodynamic Analysis of a Popular Automobile Model with Various Add-On Devices using Computational Fluid Dynamics. International Journal of Vehicle Structures and Systems, 12 (4). ISSN 0975-3060

Prakash, S. and Prabhahar, M. and Kurian, Alen Varghese and Girishanker, S and Mani, Kurian (2020) CFD analysis on heat transfer in a building wall using Phase Change Materials (PCM). IOP Conference Series: Materials Science and Engineering, 993. 012017. ISSN 1757-899X

Saravana Kumar, M. and Prabhahar, M. and Prakash, S. and Senthil, J. and Thiagarajan, C. (2020) Experimental analysis of lemon grass biodiesel (LGB) with different exhaust gas recirculation. Materials Today: Proceedings, 33. pp. 876-880. ISSN 22147853

Thiagarajan, C. and Prabhahar, M. and Prakash, S. and Senthil, J. and Kumar, M. Saravana (2020) Heat transfer analysis and optimization of engine cylinder liner using different materials. Materials Today: Proceedings, 33. pp. 778-783. ISSN 22147853

Sassykova, L.R. and Aubakirov, Y.A. and Sh. Akhmetkaliyeva, M. and Sassykova, A.R. and Sendilvelan, S. and Prabhahar, M. and Prakash, S. and Tashmukhambetova, Zh.Kh. and Abildin, T.S. and Zhussupova, A.K. (2020) Heavy metals accumulation in plants of the dry-steppe zone of the East Kazakhstan region. Materials Today: Proceedings, 33. pp. 1187-1191. ISSN 22147853

Tamilselvan, Palsami and Sassykova, Larissa and Prabhahar, M. and Bhaskar, Kathirvelu and Kannayiram, Gomathi and Subramanian, Sendilvelan and Prakash, S. (2020) Influence of saturated fatty acid material composition in biodiesel on its performance in internal combustion engines. Materials Today: Proceedings, 33. pp. 1181-1186. ISSN 22147853

Prabhahar, M. and Prakash, S. and George, Iwin and Swaroop and Amith, K.K (2020) Optimization of performance and emission characteristics of bio diesel fuelled VCR engine using Taguchi approach. Materials Today: Proceedings, 33. pp. 859-867. ISSN 22147853

Prakash, S. and Prabhahar, M. and Thiagarajan, C. and Amith, A. and Mohanbabu, S. (2020) Performance Test of Tyre Pyrolysis Oil in Different Blended Ratio with Diesel. IOP Conference Series: Materials Science and Engineering, 993 (1). 012018. ISSN 1757-8981

Kotaiah, Kolla and Periyasamy, P. and Prabhahar, M. (2020) Performance and emission characteristics of small agricultural diesel engine using Lemongrass oil and its diesel blends. Materials Today: Proceedings, 33. pp. 658-662. ISSN 22147853

Sankaran, Ganesh and Venkatesan, S. and Prabhahar, M. (2020) Range Anxiety on electric vehicles in India -Impact on customer and factors influencing range Anxiety. Materials Today: Proceedings, 33. pp. 895-901. ISSN 22147853

Baiseitov, D.A. and Tursynbek, S. and Sassykova, L.R. and Amir, Zh. and Orazbayev, A. and Tulepov, M.I. and Kudyarova, Zh. and Sendilvelan, S. and Prabhahar, M. and Prakash, S. (2020) Research of the combustion of gas-generating compositions with additives of carbon powders. Materials Today: Proceedings, 33. pp. 1216-1220. ISSN 22147853

Senthil, J. and Prabhahar, M. and Thiagarajan, C. and Prakash, S. and Lakshmanan, Ramalingam (2020) Studies on performance and process improvement of implementing novel vacuum process for new age castings. Materials Today: Proceedings, 33. pp. 813-819. ISSN 22147853

Prakash, S. and Prabhahar, M. and Niyas, O.P. and Faris, Safavanul and Vyshnav, C. (2020) Thermal barrier coating on IC engine piston to improve efficiency using dual fuel. Materials Today: Proceedings, 33. pp. 919-924. ISSN 22147853

Thiagarajan, C. and J, Karthick. and Prakash, S. and Senthil, J. and Prabhahar, M. (2019) Effective Reduction in Utility Cost in A Beverage Plant. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2108-2112. ISSN 22498958

Kumar, M. Saravana and Prabhahar, M. and Sendilvelan, S. and Singh, Sanjay and Venkatesh, R. and Bhaskar, K. (2019) Combustion, performance and emission analysis of a diesel engine fueled with methyl esters of Jatropha and fish oil with exhaust gas recirculation. Energy Procedia, 160. pp. 404-411. ISSN 18766102

Prakash, S. and Prabhahar, M. and Sendilvelan, S. and Venkatesh, R. and Singh, Sanjay and Bhaskar, K. (2019) Experimental studies on the performance and emission characteristics of an automobile engine fueled with fish oil methyl ester to reduce environmental pollution. Energy Procedia, 160. pp. 412-419. ISSN 18766102

Prabhahar, M. and Sendilvelan, S. and Francis Xavier, J. (2017) Effect of Dimethoxy-Methane (C3H8O2) on Combustion Characteristics of a Direct Injection Diesel Engine with Variable Compression Ratio Fuelled with Biodiesel Blends with Diesel (C10.8H18.7). Oriental Journal of Chemistry, 33 (6). pp. 2937-2941. ISSN 0970020X

Rajan, K. and Prabhahar, M. and Senthilkumar, K.R. (2016) Experimental studies on the performance, emission and combustion characteristics of a biodiesel-fuelled (Pongamia methyl ester) diesel engine with diethyl ether as an oxygenated fuel additive. International Journal of Ambient Energy, 37 (5). pp. 439-445. ISSN 0143-0750

Prabhahar, M. and Rajan, K. (2013) Performance and combustion characteristics of a diesel engine with titanium oxide coated piston using Pongamia methyl ester. Journal of Mechanical Science and Technology, 27 (5). pp. 1519-1526. ISSN 1738-494X

Book Section

Prabhahar, M. and Deh Kiani, Mostafa Kiani and Bhaskar, K. and Sendilvelan, S. and Prakash, S. and Sassykova, L.R. (2019) Studies on pongamia oil methyl ester fueled direct injection diesel engine to increase efficiency and to reduce harmful emissions. In: Advanced Biofuels. Elsevier, pp. 217-245.

Conference or Workshop Item

Sundarrajan, Ashokkumar and Sathiyaraj, S. and Prabhahar, M. and Teji, Jenson and Salam, Muhammed Razi Bin (2025) Investigating the mechanical characteristics of hybrid laminates utilizing glass fiber, almond shell and epoxy resin. In: Investigating the mechanical characteristics of hybrid laminates utilizing glass fiber, almond shell and epoxy resin.

Thiagarajan, C. and Natarajan, Elangovan and Prabhahar, M. and Jayapalan, Senthil and Kuppuswami, Surendrababu (2025) Investigation on the efficiency of ZrN and CuN multi-layer coatings in advanced machining processes. In: Investigation on the efficiency of ZrN and CuN multi-layer coatings in advanced machining processes.

Reddy, S. L. Prathapa and Maguluri, Lakshmana Phaneendra and Prabhahar, M. and Raffik, R. and Puma, Julio Cesar Tisnado and Singh, Devesh Pratap (2024) An efficient biometric identification technology for Iris scanning. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhahar, M. and Hassan, Shazzat Ali Mohammed and Imam, Fazil and Ahmad, Faizan (2023) Design and analysis of a gas turbine blade by using FEM. In: UNSPECIFIED.

Thiagarajan, C. and Prabhahar, M. and Ali Khan, Abdul Bazith and Sanjay, Abel and Abhijith, U. (2023) Effect of ferric oxide nanoparticle (Fe2O3) and waste transformer oil in a compression ignition engine. In: UNSPECIFIED.

Prabhahar, M. and Prakash, S. and Raju, Richu and Mathew, Robin and Sha N., Nabin (2023) Evaluation and optimization using Taguchi methodology for fuel injection strategies of pongamia methyl ester as fuel. In: UNSPECIFIED.

Prabhahar, M. and Prakash, S. and Hussain, Alimama and Rasul, MD Gulam and Alam, MD Masum (2023) Evaluation of fuel injection strategies for algae biodiesel - fueled VCR direct injection diesel engine. In: UNSPECIFIED.

Senthil, J. and Prabhahar, M. and Vijay, Sri Garhil and Shriyan, Manoj G. and Hareesh P. (2023) Experimental investigation and optimization using Taguchi method and shorea biodiesel on VCR engine. In: UNSPECIFIED.

Thiagarajan, C. and Senthil, J. and Prabhahar, M. and Sindhuraj S. and Natarajan R. and Vasanth G. (2023) Experimental investigation and parameter influence on VCR engine using Jojoba biodiesel fuel. In: UNSPECIFIED.

Enthil, J. S. and Thiagarajan, C. and Prabhahar, M. and George, Kevin and Mathew, Sachin A. and James, Rony Abraham (2023) Experimental investigations on mechanical and thermo mechanical properties of chicken feather/pineapple leaf fiber reinforced poly lactic acid (PLA) matrix bio composites. In: UNSPECIFIED.

Prabhahar, M. and Athitya, M. Praveen and Chitrambalam, M. Thiru and Prabhu, L. and Prakash, S. (2022) Experimental investigation of MS material in laser cutting machine using Taguchi method. In: UNSPECIFIED.

Prakash, S. and Subuhan, A. and Prabhu, L. and Prabhahar, M. (2022) Influence of surface roughness factor for manufacturing process parameters optimization of pure Titanium using wire cut electrical discharge machining. In: UNSPECIFIED.

Murali Manohar, R. and Sendil Velan, S. and Prabhahar, M. and Casmir Jayaseelan, G. Antony (2011) UNSPECIFIED In: 2011 International Conference on Green Technology and Environmental Conservation (GTEC 2011), Chennai.