Article

Balsingh, Samuvel Michael and Krishnamoorthi, Sangeetha and Prakash, S. and Babu, J. M. (2025) Analysis of Performance, Combustion Dynamics and Emission Profiles of a VCR Multi-Fuel Engine with Ethanol-Plastic Oil Blend. International Journal of Vehicle Structures and Systems, 17 (1). 1 - 9. ISSN 09753540; 09753060

Krishnamoorthi, Sangeetha and null, null and null, null and null, null (2025) Enhancing Thermal and Combustibility Properties of Glass Fibre Reinforced Composites: A Comparative Study of Synthetic and Castor Oil-Based Bio-Epoxy. Springer Proceedings in Materials, 79. 191 - 202. ISSN 26623161; 2662317X

Krishnamoorthi, Sangeetha and Ayyappan, A. and Sathiya, Agin and SriKumar, A (2025) Enhancing Thermal and Combustibility Properties of Glass Fibre Reinforced Composites: A Comparative Study of Synthetic and Castor Oil-Based Bio-Epoxy. Springer, 79. pp. 191-202. ISSN 2662-3161

Krishnamoorthi, Sangeetha and Prabhu, L. and Rahil, Mohammad and Nagasai, Kollimarla and Faim, Md (2025) Experimental Investigation of Diesel Engine Using Chlorella Algae-Acetylene by Dual Fuel Mode. Springer Proceedings in Materials, 79. 69 - 79. ISSN 26623161; 2662317X

Krishnamoorthi, Sangeetha and Prabhu, L. and Rahil, Md. and Nagasai, Kollimarla and Faim, Md. (2025) Experimental Investigation of Diesel Engine Using Chlorella Algae-Acetylene by Dual Fuel Mode. Springer, 79. pp. 69-79. ISSN 2662-3161

Samuvel Michael, B. and Krishnamoorthi, Sangeetha and Senthilkumar, A. and Raj Kumar, G. and Praveen Kumar, C. (2025) Exploring the Impact of Varied Injection Angle on the Performance of a Variable Compression Ratio (VCR) Engine Fueled by Biodiesel from Plastic Waste. Springer, 79. pp. 129-137. ISSN 2662-3161

Saravanan, Manimaran S. and Krishnamoorthi, Sangeetha and Saravanakumar, Manickam Puratchiveeran and null, null and null, null (2025) Investigating Clamshell-Derived NHAp Composites with PLGA and Chitosan for Advancements in Bone Healing. Springer Proceedings in Materials, 79. 275 - 285. ISSN 26623161; 2662317X

Saravanan, M. and Krishnamoorthi, Sangeetha and Saravanakumar, M. and Devarjun, V. S. and Lal, Abhinandh (2025) Investigating Clamshell-Derived NHAp Composites with PLGA and Chitosan for Advancements in Bone Healing. Springer, 79. pp. 275-285. ISSN 2662-3161

Thiagarajan, C. and Krishnamoorthi, Sangeetha and null, null and null, null and Adwaith, Mohan (2025) Optimization and Tribological Behaviour of Stir Cast Aluminium MMCs by Taguchi Method. Springer Proceedings in Materials, 79. 33 - 47. ISSN 26623161; 2662317X

Thiagarajan, C. and Krishnamoorthi, Sangeetha and Adithyan, P. and Ajmal, P. A. and Adwaith, M. P. (2025) Optimization and Tribological Behaviour of Stir Cast Aluminium MMC’s by Taguchi Method. Springer, 79. pp. 33-47. ISSN 2662-3161

Krishnamoorthi, Sangeetha and L, Prabhu and M, Prabhahar and Mehaboob, Adil and Abdulla, Adil (2025) Optimization of biodiesel production from jatropha oil and its impact on engine performance and emissions using response surface methodology. Environmental Research and Technology, 8 (2). pp. 328-344. ISSN 2636-8498

Krishnamoorthi, Sangeetha and Thiagarajan, C. and Prabhahar, M. and Raghunathan, Anandhu K. and Deepak, P. V. (2025) Performance and Emission Characteristics of Soapnut Methyl Esters-Diesel Blends Between VCR and Tata Zip XL Engine. Springer Proceedings in Materials, 79. 251 - 261. ISSN 26623161; 2662317X

Krishnamoorthi, Sangeetha and Thiagarajan, C. and Prabhahar, M. and Raghunathan, Anandhu K. and Deepak, P. V. (2025) Performance and Emission Characteristics of Soapnut Methyl Esters-Diesel Blends Between VCR and Tata Zip XL Engine. Springer Proceedings in Materials, 79. pp. 251-261. ISSN 2662-3161

Rajasekaran, Mahesh and Krishnamoorthi, Sangeetha and Ganesh, P. Ravichandra and Vijayakumar, A. and Yugendran, S. (2025) Synergistic Enhancement of Diesel Engine Performance and Emissions through Jackfruit Peel Biodiesel Blends: An Experimental Investigation. International Journal of Vehicle Structures and Systems, 17 (1). 79 - 83. ISSN 09753540; 09753060

Prabhu, L. and Krishnamoorthi, Sangeetha and Prakash, S. and Ashok, Akshay and Vishnu, P. V. (2024) Development of Computerized Shell-and-Tube Heat Exchanger System in Co-Current, Counter-Current Mode, and Cross-Flow Type. Springer, 58. pp. 327-335. ISSN 2662-3161

Prabhu, L. and Baskaran, T. and Krishnamoorthi, Sangeetha and Saravanan, M. (2024) Dissimilar Metal Welds and Weld Joint Analysis for Duplex with Super Duplex Stainless Steel Plate Joint by Semi-automatic TIG Welding. Springer, 58. pp. 387-397. ISSN 2662-3161

Saravanan, M. and Venkatesan, V. and Prabhu, L. and Krishnamoorthi, Sangeetha (2024) Study of Mechanical Behavior and Wear Characteristics of Aluminum Alloy 7178–Fly Ash Composites. Springer, 58. pp. 231-241. ISSN 2662-3161

Rajasekaran, Mahesh and Krishnamoorthi, Sangeetha and Vijayaragavan, Mathanraj (2024) An experimental investigation of the effects of blending camphor oil infused with jack fruit biodiesel and nanoparticles on the performance, combustion, and exhaust emissions of a compression ignition engine. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Prabhu, Loganathan and Kumar, Shanmugam Satish and Krishnamoorthi, Sangeetha and Anderson, Arul Gnana Dhas and Jawahar, Raj (2023) Effect of novel tool path pattern on mechanical properties of friction stir welded AA6061 alloy. Applied Nanoscience, 13 (3). pp. 2129-2138. ISSN 2190-5509

Krishnamoorthi, Sangeetha and Prabhahar, M. and Prakash, S. and Prabhu, L. and Bhaskar, K. and Suku, Akhil V. and Shijindas, K. P. and Sooraj, S. L. and Haiter Lenin, A. and Jappes, J. T. Winowlin (2023) Investigation of Magnesium and Chromium Fillers FSW Dissimilar Joint of AA6063 and AA 5154. Advances in Materials Science and Engineering, 2023. pp. 1-13. ISSN 1687-8434

Kotaiah, Kolla and Pitchaipillai, Periyasamy and Muthuswamy, Prabhahar and Seker, Prakash and Krishnamoorthi, Sangeetha (2022) Effect of three and five holes nozzle on thermal efficiency and emission characters of DI-CI diesel engine with lemongrass biodiesel as alternate fuel. Thermal Science, 26 (2 Part). pp. 1197-1205. ISSN 0354-9836

Prabhahar, M. and Kannayiram, Gomathi and Prakash, S. and Saravanakumar, M. and Krishnamoorthi, Sangeetha and Sendilvelan, S. and Rahul Senthan, P. and Ashikmon, T. S. and Karthik, M. and Lenin, Haiter and Alsohaimi, Ibrahim H. (2022) Physicochemical Characterization of Star Anise Silver Nanoparticles Incorporated Chitosan Biomaterial for Absorb Water and Cure Wounds. Adsorption Science & Technology, 2022. ISSN 0263-6174

Krishnamoorthi, Sangeetha and Prabhu, L. and Kuriakose, Glen and Jose lewis, Dave and Harikrishnan, J. (2021) Air-cooling system based on phase change materials for a vehicle cabin. Materials Today: Proceedings, 45. pp. 5991-5996. ISSN 22147853

Krishnamoorthi, Sangeetha and Prabhu, L. and Shadan, MD and Raj, Harsh and Akram, Nadeem (2021) Design and analysis of electric Go-Kart. Materials Today: Proceedings, 45. pp. 5997-6005. ISSN 22147853

Krishnamoorthi, Sangeetha and Prabhahar, M. and Madhavan, V. and Pragathish, T. and Johnson, F. (2021) Effect of variation in injector nozzle holes on the performance of preheated Spirulina methyl ester used in VCR engine. Materials Today: Proceedings, 45. pp. 5840-5846. ISSN 22147853

Vijayakumar, K.R. and Jayaseelan, J. and Ethiraj, N. and Prabhahar, M. and Bhaskar, K. and Jayabalakrishnan, D. and Sendilvelan, S. and Krishnamoorthi, Sangeetha (2021) Investigation on aluminium/mild steel plates bonded polyurethane sheets to control vibration. Materials Today: Proceedings, 45. pp. 5860-5867. ISSN 22147853

Bhaskar, K and Sassykova, L.R. and Prabhahar, M. and Percis, E. Sheeba and Nalini, A. and Jenish, T. and Jayarajan, J. and Jayabalakrishnan, D. and Sendilvelan, S. and Krishnamoorthi, Sangeetha (2021) Resistance Heated Catalytic Converter (RHCC) with copper oxide catalyst for reducing HC/CO emission from automobile. Materials Today: Proceedings, 45. pp. 5868-5872. ISSN 22147853

Prabhu, L. and Krishnamoorthi, Sangeetha and Gokul, P and Sushan, Nandhu and Hisham Harshed, P H and Jose, Aviss (2020) Aerodynamics analysis of the car using Solidworks flow simulation with rear spoiler using CFD. IOP Conference Series: Materials Science and Engineering, 993 (1). 012002. ISSN 1757-8981

Prabhu, L. and Krishnamoorthi, Sangeetha and Akbar, Muhammed Adil and Mubashir, P and Prashob, P (2020) Design and fabrication of ball burnishing tool for surface finish. IOP Conference Series: Materials Science and Engineering, 993 (1). 012001. ISSN 1757-8981

Saravanan, M and Krishnamoorthi, Sangeetha and Karthik, N and Kavin Kumar, S and Nikhil Krishnan, V (2020) Evaluation of mechanical strength of combined natural fiber reinforced polymer composites. IOP Conference Series: Materials Science and Engineering, 993 (1). 012021. ISSN 1757-8981

Prabhu, L. and Kumar, Dr.S.Satish and Krishnamoorthi, Sangeetha and Prakash, S. (2019) Optimization of vibration parameters for boring bar operation by RSM and ANN. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2167-2176. ISSN 22498958

Krishnamoorthi, Sangeetha and Prabhu, L. and R, Sakthikumar (2019) Performance and Emission Characteristics of Cashewnut Shell Liquid as Alternate Fuel with Five Hole Nozzle. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2117-2119. ISSN 22498958

Krishnamoorthi, Sangeetha and Prabhahar, Dr. M. and Kumar, G.R.Muthu (2019) Performance and Emission Characteristics of Dual Biofuel (CNSL and Rice Bran Oil) Blended with Diesel in CI Engine. International Journal of Engineering and Advanced Technology, 8 (6s3). pp. 2120-2122. ISSN 22498958

Conference or Workshop Item

Reddy, Jagan Mohan and Mari, Saravanan and Krishnamoorthi, Sangeetha and Govindhasamy, Suresh and Prakash, S. (2025) Synthesis of nano-hydroxyapatite from squid waste for advanced bone applications through precipitation process. In: Synthesis of nano-hydroxyapatite from squid waste for advanced bone applications through precipitation process.

Rajasekaran, Mahesh and Krishnamoorthi, Sangeetha and Krishnan, Vijayakumar and Ebim, Melwin P. and Abraham, Ribo John (2024) Analysis of jack fruit peel-based biodiesel in VCR engine at various compression ratios using single hole nozzle. In: UNSPECIFIED.

Mari, Saravanan and Srinivasa, Pradhyoth Y. and Muthuswamy, Prabhahar and Krishnamoorthi, Sangeetha and Magalingam, Saravana Kumar (2024) Ballistic impact response of the basalt/polypropylene mesh epoxy composites. In: UNSPECIFIED.

Loganathan, Prabhu and Alagarsamy, Senthilkumar and Krishnamoorthi, Sangeetha and Singh, Vikash Kumar and Tiwary, Ranjit (2024) Experimental analysis of computerized heat exchanger optimized by artificial neural network. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Jayakaran, S. and Loganathan, Prabhu and Chandrasekharan, Thiagarajan (2024) Optimization on the process parameters and mechanical behavior of dissimilar AA6061/AA5083 metal matrix composites by FSW. In: UNSPECIFIED.

Mari, Saravanan and Krishnamoorthi, Sangeetha and Kalimuthu, Periyasamy and Karim, Hisham and Philip, Jacob Alexander (2024) Optimization on the process parameters and mechanical properties of AA6061 metal matrix composites by FSW. In: UNSPECIFIED.

Michael, Samuvel and Krishnamoorthi, Sangeetha and Sekar, Prakash and Kumar, Rahul and Alam, Mohammed Jafar (2024) Performance test of biofuel using port injection system compare with tata single cylinder engine. In: UNSPECIFIED.

Mari, Saravanan and Krishnamoorthi, Sangeetha and Abdulsalam, Imthiyas and Muhammed and Reddy, Nuka Naga Prasad (2024) Tribological analysis of Kevlar with pineapple fiber with ceramic filler reinforced polymer composite. In: UNSPECIFIED.

Sathiyaraj S. and Krishnamoorthi, Sangeetha and Vyshakh M. and Kumar P. S., Akshay and Aswin K. (2023) Automation in pneumatic oil dipping mechanism with two hand operation and fully advanced confirmation arrangements to enable safety and quality. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhu L. and Kannan, Hithul and Pradhyoth Y. S. and Thiruvarangan M. (2023) Design & deployment of surveillance bot using Raspberry Pi & IoT. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhahar, M. and Hassan, Shazzat Ali Mohammed and Imam, Fazil and Ahmad, Faizan (2023) Design and analysis of a gas turbine blade by using FEM. In: UNSPECIFIED.

Prabhu, L. and Krishnamoorthi, Sangeetha and Kumar, Amal A. and Mathew, Amith and Babu, Brezen (2023) Design and development of electronic switching inelectro magnetic engine. In: UNSPECIFIED.

Prabhu, L. and Krishnamoorthi, Sangeetha and Joseph, Jackson and George, Jerish K. and Naveen P. (2023) Development of advanced 3D printing technology in automotive industry. In: UNSPECIFIED.

Krishnamoorthi, Sangeetha and Prabhu L. and Prasad M. K., Hari and Kuriyakose P. and Shuhaib, P. (2023) FEA analysis of exhaust system. In: UNSPECIFIED.

Ranjith, K. B. and Krishnamoorthi, Sangeetha and Prabhu L. and Thayananthan, E. (2023) Recycling of scrap in fixture industries. In: UNSPECIFIED.